Paper
19 November 2007 Design and fabrication of high-performance InGaAsP/InP electroabsorption modulator
Hua Yang, Mee Koy Chin, Desmond C.S. Lim, Jingtao Zhou, Shuhying Lee, Yuanbing Cheng, HongLiang Zhu, Weixi Chen
Author Affiliations +
Proceedings Volume 6782, Optoelectronic Materials and Devices II; 67820U (2007) https://doi.org/10.1117/12.742189
Event: Asia-Pacific Optical Communications, 2007, Wuhan, China
Abstract
Electroabsorption modulator has been widely used in modern optical fiber communication system and analog RF link system. In this paper, the design of a high-performance EAM with low coupling loss, high saturation power and high speed was demonstrated, which include the waveguide, active core and electrodes. A novel EAM with large optical cavity (LOC) waveguide structure, intrastep quantum well (IQW) active core and traveling wave electrodes was presented and fabricated successfully. Our results show that the LOC waveguide effectively improved the optical profile of EAM and reduced the coupling loss. The obtained traveling wave EAM achieved 21dBm saturation power and 23GHz 3-dB bandwidth.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hua Yang, Mee Koy Chin, Desmond C.S. Lim, Jingtao Zhou, Shuhying Lee, Yuanbing Cheng, HongLiang Zhu, and Weixi Chen "Design and fabrication of high-performance InGaAsP/InP electroabsorption modulator", Proc. SPIE 6782, Optoelectronic Materials and Devices II, 67820U (19 November 2007); https://doi.org/10.1117/12.742189
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Lab on a chip

Electrodes

Modulators

Quantum wells

Capacitance

Optical fibers

Back to Top