Measurement of high-k and metal film thickness on FinFET sidewalls using scatterometry

Thaddeus G. Dziura; Benjamin Bunday; Casey Smith; Muhammad M. Hussain; Rusty Harris; Xiafang Zhang; Jimmy M. Price

doi:10.1117/12.773593

24 March 2008 Measurement of high-k and metal film thickness on FinFET sidewalls using scatterometry

Thaddeus G. Dziura, Benjamin Bunday, Casey Smith, Muhammad M. Hussain, Rusty Harris, Xiafang Zhang, Jimmy M. Price

Proceedings Volume 6922, Metrology, Inspection, and Process Control for Microlithography XXII; 69220V (2008) https://doi.org/10.1117/12.773593
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States

Abstract

Aggressive CMOS transistor scaling requirements have motivated the IC industry to look beyond simply reducing the film thickness or implementing different gate stack materials towards fundamentally redesigning the transistor architecture by forcing the silicon channel to protrude upwards from the planar (2D) substrate. These 3D transistors, namely FinFETs, ideally offer at least a 2X improvement in the drive current since more than one surface is available, for which the minority carrier population can be adjusted by an applied voltage. However, the ability to modulate this voltage is known to suffer due to the non-uniform film deposition on the three sides of the Si Fin. This concern is of immediate interest because it impedes device performance and future integration since subtle differences among the thicknesses on each side of the Fin will negatively impact threshold voltage and the capability to tune the effective work function. It is therefore necessary to have an in-line metrology capability that can properly characterize and understand the deposition of both the high-k and metal gate film on the sidewalls of the Fin in order for FinFETs to ultimately replace planar CMOS devices. We will report on the ability of scatterometry to accurately measure the high-k and metal film thickness on the sidewall of the FinFET. The results will be discussed in detail with emphasis on sensitivity towards fin critical dimension (CD) and sidewall thickness, and comparison of the conclusions reached from the analysis with cross-sectional transmission electron microscopy (TEM) data.

Citation Download Citation

Thaddeus G. Dziura, Benjamin Bunday, Casey Smith, Muhammad M. Hussain, Rusty Harris, Xiafang Zhang, and Jimmy M. Price "Measurement of high-k and metal film thickness on FinFET sidewalls using scatterometry", Proc. SPIE 6922, Metrology, Inspection, and Process Control for Microlithography XXII, 69220V (24 March 2008); https://doi.org/10.1117/12.773593

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available