Paper
29 August 2008 The design, construction and characterization of a solid elastic lens
Author Affiliations +
Abstract
Recent times have seen the production of normal and micro liquid lenses with variable focal length. These have been specially made with transparent elastic materials and liquid medium between them, or with a dielectric liquid medium inside the cavity. Change in the volume of the liquid medium, in the first case, or the application of an electric field as in the second, produced a change in the optical parameters of the lens. The present study offers the opto-mechanical design, manufacture and characterization of a solid elastic lens made of Polydimethylsiloxane (PDMS). To do so, we have prepared a mechanical support frame to hold all of the components of the lens and also allow for the application of radial stress on its periphery. In order to ensure a well-finished lens surface a high quality optical glass mold has also been constructed. Finally, we will present an analysis of the properties of this type of lens when it undergoes variations of radial stress. The experimental results are presented.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Santiago-Alvarado, S. Vázquez-Montiel, F. Iturbide-Jiménez, R. Arriaga-Martínez, and J. González-García "The design, construction and characterization of a solid elastic lens", Proc. SPIE 7060, Current Developments in Lens Design and Optical Engineering IX, 706017 (29 August 2008); https://doi.org/10.1117/12.795699
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Teeth

Solids

Lens design

Liquids

Optics manufacturing

Design for manufacturability

Optomechanical design

RELATED CONTENT

DefGO
Proceedings of SPIE (August 07 2018)
Mechanical design and analysis of a variable focal length lens
Proceedings of SPIE (September 18 2007)
Optimization of lens designer to manufacturer communications
Proceedings of SPIE (January 01 1991)
Prototyping of miniature plastic imaging lens
Proceedings of SPIE (January 22 2004)

Back to Top