Compensation of overlay errors due to mask bending and non-flatness for EUV masks

Manish Chandhok; Sanjay Goyal; Steven Carson; Seh-Jin Park; Guojing Zhang; Alan M. Myers; Michael L. Leeson; Marilyn Kamna; Fabian C. Martinez; Alan R. Stivers; Gian F. Lorusso; Jan Hermans; Eric Hendrickx; Sanjay Govindjee; Gerd Brandstetter; Tod Laursen

doi:10.1117/12.814428

17 March 2009 Compensation of overlay errors due to mask bending and non-flatness for EUV masks

Manish Chandhok, Sanjay Goyal, Steven Carson, Seh-Jin Park, Guojing Zhang, Alan M. Myers, Michael L. Leeson, Marilyn Kamna, Fabian C. Martinez, Alan R. Stivers, Gian F. Lorusso, Jan Hermans, Eric Hendrickx, Sanjay Govindjee, Gerd Brandstetter, Tod Laursen

Author Affiliations +

Proceedings Volume 7271, Alternative Lithographic Technologies; 72710G (2009) https://doi.org/10.1117/12.814428
Event: SPIE Advanced Lithography, 2009, San Jose, California, United States

Abstract

EUV blank non-flatness results in both out of plane distortion (OPD) and in-plane distortion (IPD) [3-5]. Even for extremely flat masks (~50 nm peak to valley (PV)), the overlay error is estimated to be greater than the allocation in the overlay budget. In addition, due to multilayer and other thin film induced stresses, EUV masks have severe bow (~1 um PV). Since there is no electrostatic chuck to flatten the mask during the e-beam write step, EUV masks are written in a bent state that can result in ~15 nm of overlay error. In this article we present the use of physically-based models of mask bending and non-flatness induced overlay errors, to compensate for pattern placement of EUV masks during the e-beam write step in a process we refer to as E-beam Writer based Overlay error Correction (EWOC). This work could result in less restrictive tolerances for the mask blank non-flatness specs which in turn would result in less blank defects.

Citation Download Citation

Manish Chandhok, Sanjay Goyal, Steven Carson, Seh-Jin Park, Guojing Zhang, Alan M. Myers, Michael L. Leeson, Marilyn Kamna, Fabian C. Martinez, Alan R. Stivers, Gian F. Lorusso, Jan Hermans, Eric Hendrickx, Sanjay Govindjee, Gerd Brandstetter, and Tod Laursen "Compensation of overlay errors due to mask bending and non-flatness for EUV masks", Proc. SPIE 7271, Alternative Lithographic Technologies, 72710G (17 March 2009); https://doi.org/10.1117/12.814428

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available