Paper
28 May 2009 ModelSim-PSIM mixed signal simulation for power electronics digital control design
Author Affiliations +
Proceedings Volume 7363, VLSI Circuits and Systems IV; 73630V (2009) https://doi.org/10.1117/12.822051
Event: SPIE Europe Microtechnologies for the New Millennium, 2009, Dresden, Germany
Abstract
In the design of Power Electronics converters, several approaches can be chosen for the implementation of the closed loop control. The use of a digital control loop implemented in a FPGA is becoming quite common. For the design of such a system, a simulation environment must be provided to check the digital and analog part working together. The simulation of both the analog and digital part is a very difficult task, which involves the simultaneous usage of an analog and a digital simulator, or the use of a mixed signal simulator. In this paper, we present a method to perform mixed signal simulation. The simulation is performed by linking PSIM analog simulator and ModelSim digital simulator. This method has proven to be very effective in the design of digital control circuits for power converters, implemented in FPGAs.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. García Valderas, P. Zumel, A. Lázaro, C. López Ongil, and L. Entrena "ModelSim-PSIM mixed signal simulation for power electronics digital control design", Proc. SPIE 7363, VLSI Circuits and Systems IV, 73630V (28 May 2009); https://doi.org/10.1117/12.822051
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital electronics

Analog electronics

Device simulation

Control systems

Field programmable gate arrays

Data modeling

Digital electronic circuits

RELATED CONTENT


Back to Top