Paper
5 February 2010 High-brightness pump sources using 2D VCSEL arrays
Jean-Francois Seurin, Guoyang Xu, Qing Wang, Baiming Guo, Robert Van Leeuwen, Alexander Miglo, Prachi Pradhan, James D. Wynn, Viktor Khalfin, Chuni Ghosh
Author Affiliations +
Abstract
Many applications require laser pump sources with high output power (tens to hundreds of Watts) in the smallest spot, with the smallest divergence. Such high-brightness pump sources typically use edge-emitting semiconductor lasers. However, it is also possible to use high-power two-dimensional vertical-cavity surfaceemitting laser (VCSEL) arrays for this purpose. Using a single 976nm 2D VCSEL array chip in an external cavity configuration, combined with a matching micro-lens array, we have demonstrated more than 30W output power from a 50μm/0.22NA fiber, corresponding to a brightness of 10MW/cm2.sr. This represents a substantial reduction in module complexity compared to edge-emitter based modules with similar brightness. These novel high-brightness pump sources exhibit some well-known intrinsic VCSEL performance features such as wavelength stability and narrow spectrum. Power and brightness can be scaled up using polarization and spectral combining.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jean-Francois Seurin, Guoyang Xu, Qing Wang, Baiming Guo, Robert Van Leeuwen, Alexander Miglo, Prachi Pradhan, James D. Wynn, Viktor Khalfin, and Chuni Ghosh "High-brightness pump sources using 2D VCSEL arrays", Proc. SPIE 7615, Vertical-Cavity Surface-Emitting Lasers XIV, 76150F (5 February 2010); https://doi.org/10.1117/12.842492
Lens.org Logo
CITATIONS
Cited by 21 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Mirrors

Laser applications

Diode pumped solid state lasers

Polarization

Lasers

Fiber lasers

Back to Top