Paper
27 August 2010 Thermocavitation and its application for fabrication of micron-sized holes on metallic and dielectric thin films
Author Affiliations +
Abstract
Thermocavitation is a mechanism induced by a focused CW laser beam into a high absorbing solution. As a result an overheated region is created followed by explosive phase transition and consequently the formation of an expanding bubble. Once the bubble reaches a cooler region it collapses very rapidly crating a shock wave. Thermocavitation can be a useful tool for the generation of ultrasonic waves and controlled ablation with the important difference compared with pulsed lasers that low power lasers are required. In particular, the above mentioned pressure waves may be capable of producing damage to substrates, for example, in metallic and dielectric thin films. In this work, we present an application of the thermocavitation phenomena which consist in the formation of micro-holes on thin films of titanium and Indium Tin Oxide (ITO) deposited on glass substrate. The micro holes can be employed as a micrometer light sources or spatial filters.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. C. Ramirez-San-Juan, J. P. Padilla-Martinez, P. Zaca Moran, E. Aboytes-Rodriguez, A. E. Martinez-Cantón, and R. Ramos-Garcia "Thermocavitation and its application for fabrication of micron-sized holes on metallic and dielectric thin films", Proc. SPIE 7762, Optical Trapping and Optical Micromanipulation VII, 77621E (27 August 2010); https://doi.org/10.1117/12.861314
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cavitation

Thin films

Titanium

Continuous wave operation

Dielectrics

Pulsed laser operation

Laser ablation

Back to Top