Paper
16 August 2010 Adaptive feedback beam shaping of the CO2 welding laser
Author Affiliations +
Abstract
The depth of penetration is probably the most important factor that influences the quality of a laser weld. The depth strongly depends on the focus of the welding beam. The sublimating material forms plasma vapors, that act as a lens and defocus the laser beam. Our contribution presents a method to compensate this phenomenon using an adaptive mirror - a mirror with flexible surface that can adjust the shape of the welding beam. The mirror is regulated by a feedback control loop so that the focus of the laser beam and the penetration depth remain in an optimal range. Since the only possibility to state the penetration depth is to monitor outer effects to estimate desired parameters. a sensor unit is used to monitor the optical emissions of the plasma vapors and the measured data are inputs to an algorithm that estimates the penetration depth. We have done several experiments that study the relation of the adaptive mirror focus and the laser beam shape and how it influences the penetration depth. The estimation results are compared with material samples from test welds. On the basis of these experiments, a preliminary version of a control system was developed and a tested. The tests has shown that the implementation of the control system has positive influence on the quality of the resulting weld.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Petr Jedlicka, Libor Mrna, Martin Šarbort, and Šimon Rerucha "Adaptive feedback beam shaping of the CO2 welding laser", Proc. SPIE 7789, Laser Beam Shaping XI, 77890V (16 August 2010); https://doi.org/10.1117/12.860646
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Adaptive optics

Beam shaping

Plasma

Carbon dioxide lasers

Laser welding

Energy transfer

Back to Top