Optical initiation of nanoporous energetic silicon for safing and arming technologies

Wayne A. Churaman; Collin R. Becker; Grace D. Metcalfe; Brendan M. Hanrahan; Luke J. Currano; Conrad R. Stoldt

doi:10.1117/12.860778

3 September 2010 Optical initiation of nanoporous energetic silicon for safing and arming technologies

Wayne A. Churaman, Collin R. Becker, Grace D. Metcalfe, Brendan M. Hanrahan, Luke J. Currano, Conrad R. Stoldt

Proceedings Volume 7795, Optical Technologies for Arming, Safing, Fuzing, and Firing VI; 779506 (2010) https://doi.org/10.1117/12.860778
Event: SPIE Optical Engineering + Applications, 2010, San Diego, California, United States

Abstract

Nanoporous silicon, commonly recognized for its photoluminescent properties, has gained attention as a new energetic material capable of energy density more than twice that of TNT. The addition of an oxidizer solution to inert nanoporous silicon results in an exothermic reaction when heat, friction, or focused light is supplied to the system. The energetic material can be integrated alongside microelectronics and micro-electro-mechanical systems (MEMS) for on-chip applications. This integration capability, along with the potential for large energetic yield, makes nanoporous energetic silicon a viable material for developing novel MEMS Safing and Arming (S&A) technologies. While ignition of nanoporous energetic silicon has been demonstrated for the purpose of propagation velocity measurements using a YAG laser, in this paper we show optical ignition for potential integration of the energetic with a miniaturized S&A device. Ignition is demonstrated using a 514nm laser at 37.7mW and a power density of 2.7kW/cm² at a stand-off distance of 23cm. Raman spectroscopy verifies that significant stress in porous silicon is produced by a laser operating near the power density observed to ignite porous silicon. Lastly, we integrate the nanoporous energetic silicon with a MEMS S&A, and demonstrate transfer to a firetrain consisting of one primary and one secondary explosive using a thermal initiator to ignite the nanoporous energetic silicon.

Citation Download Citation

Wayne A. Churaman, Collin R. Becker, Grace D. Metcalfe, Brendan M. Hanrahan, Luke J. Currano, and Conrad R. Stoldt "Optical initiation of nanoporous energetic silicon for safing and arming technologies", Proc. SPIE 7795, Optical Technologies for Arming, Safing, Fuzing, and Firing VI, 779506 (3 September 2010); https://doi.org/10.1117/12.860778

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available