Paper
7 September 2010 Redesign of the image processing techniques used for the alignment of the LMJ amplifier section
Laurent Hilsz, Sylvain Challois, Frédéric Nicaise, Michel Luttmann, Alain Adolf
Author Affiliations +
Abstract
The laser Megajoule (LMJ) project was launched in 1995 by the French Atomic Energy Commission and is aimed at developing a facility to achieve inertial confinement fusion. The LMJ architecture is based on 176 laser beamlines. To provide these 176 high-powered beams when required for subsequent operations, one of the main issues consists in reliably aligning the laser amplifier sections. This paper provides an overview of the image processing techniques developed to identify and measure the beam centering and pointing directions. These techniques have been developed and tested thoroughly against sets of up to 450 images representing both nominal and extreme conditions acquired during the initiation and power rising of the Laser Integration Line (LIL). This facility is fully consistent with the LMJ requirements, a complete laser chain with 4 beamlines. After presenting the basic design principles, we focus on the demonstrated performances measured.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Laurent Hilsz, Sylvain Challois, Frédéric Nicaise, Michel Luttmann, and Alain Adolf "Redesign of the image processing techniques used for the alignment of the LMJ amplifier section", Proc. SPIE 7797, Optics and Photonics for Information Processing IV, 77970A (7 September 2010); https://doi.org/10.1117/12.859668
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image processing

Amplifiers

Beam splitters

Laser development

Near field

Acquisition tracking and pointing

Current controlled current source

Back to Top