Paper
11 November 2010 A simple optical system for measuring small rotation angle of mechanism
Weijun Li, Qinwei Ma, Dongwei Li, Siyang Liu, Chen Yuan
Author Affiliations +
Abstract
A simple optical system for small rotation angle measurement is constructed in this paper. A laser diode is fixed on the rotation part of the mechanism and the laser beam is received by a screen. The position of the spot could be registered from the image captured by CCD camera using the gray centroid algorithm. Then rotation could be obtained from the spot movement according to geometrical relationship. In order to verify the system and evaluate its accuracy, a deflection test of a low carbon steel cantilever beam is performed. It shows that the maximum relative error of experiment results and theoretical value is less than 1.5%, the measuring accuracy and stability is satisfied. The system in this paper has many advantages, such as high resolution, low cost, great convenience and could be used to measure small rotation angles of very complex mechanisms under non-contact request.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weijun Li, Qinwei Ma, Dongwei Li, Siyang Liu, and Chen Yuan "A simple optical system for measuring small rotation angle of mechanism", Proc. SPIE 7855, Optical Metrology and Inspection for Industrial Applications, 78550G (11 November 2010); https://doi.org/10.1117/12.871325
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
CCD cameras

Semiconductor lasers

Digital imaging

Image processing

Image resolution

Calibration

Digital image processing

Back to Top