Optimal parameters and power characteristics of piezoelectric energy harvesters with an RC circuit

Yabin Liao; Yirong Lin; Henry A. Sodano

doi:10.1117/12.881130

27 April 2011 Optimal parameters and power characteristics of piezoelectric energy harvesters with an RC circuit

Yabin Liao, Yirong Lin, Henry A. Sodano

Proceedings Volume 7977, Active and Passive Smart Structures and Integrated Systems 2011; 79770W (2011) https://doi.org/10.1117/12.881130
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

A piezoelectric based energy harvesting scheme is proposed here which places a capacitor before the load in the conditioning circuit. It is well known that the impedance between the load and source contributes heavily to the performance of the energy harvesting system. The additional capacitor provides flexibility in meeting the optimal impedance value and can be used to expand the bandwidth of the system. A theoretical model of the system is derived and the response of the system as a function of both resistance and capacitance is studied. The analysis shows that the energy harvesting performance is dominated by a bifurcation occurring as the electromechanical coupling increases above a certain value, below this point the addition of an additional capacitor does not increase the performance of the systems and above the maximum power can be achieved at all point between these two bifurcation frequencies. Additionally, it has been found that the optimal capacitance is independent of the optimal resistance. Therefore, the necessary capacitance can be chosen and then the resistance determined to provide optimal energy harvesting at the desired frequencies. For systems with low coupling the optimal added capacitance is negative (additional power to the circuit) indicating that a second capacitor should not be used for. For systems with high coupling the optimal capacitance becomes positive for a range of values inside the bifurcation frequencies and can be used to extend the bandwidth of the harvesting system. The analysis also demonstrates that the same maximum energy can be harvested at any frequency; however, outside the two bifurcation frequencies the capacitor must be negative.

Citation Download Citation

Yabin Liao, Yirong Lin, and Henry A. Sodano "Optimal parameters and power characteristics of piezoelectric energy harvesters with an RC circuit", Proc. SPIE 7977, Active and Passive Smart Structures and Integrated Systems 2011, 79770W (27 April 2011); https://doi.org/10.1117/12.881130

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available