High-speed AMB machining spindle model updating and model validation

Adam C. Wroblewski; Jerzy T. Sawicki; Alexander H. Pesch

doi:10.1117/12.880778

18 April 2011 High-speed AMB machining spindle model updating and model validation

Adam C. Wroblewski, Jerzy T. Sawicki, Alexander H. Pesch

Proceedings Volume 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011; 79830L (2011) https://doi.org/10.1117/12.880778
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

High-Speed Machining (HSM) spindles equipped with Active Magnetic Bearings (AMBs) have been envisioned to be capable of automated self-identification and self-optimization in efforts to accurately calculate parameters for stable high-speed machining operation. With this in mind, this work presents rotor model development accompanied by automated model-updating methodology followed by updated model validation. The model updating methodology is developed to address the dynamic inaccuracies of the nominal open-loop plant model when compared with experimental open-loop transfer function data obtained by the built in AMB sensors. The nominal open-loop model is altered by utilizing an unconstrained optimization algorithm to adjust only parameters that are a result of engineering assumptions and simplifications, in this case Young's modulus of selected finite elements. Minimizing the error of both resonance and anti-resonance frequencies simultaneously (between model and experimental data) takes into account rotor natural frequencies and mode shape information. To verify the predictive ability of the updated rotor model, its performance is assessed at the tool location which is independent of the experimental transfer function data used in model updating procedures. Verification of the updated model is carried out with complementary temporal and spatial response comparisons substantiating that the updating methodology is effective for derivation of open-loop models for predictive use.

Citation Download Citation

Adam C. Wroblewski, Jerzy T. Sawicki, and Alexander H. Pesch "High-speed AMB machining spindle model updating and model validation", Proc. SPIE 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011, 79830L (18 April 2011); https://doi.org/10.1117/12.880778

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available