Roll-to-roll nanopatterning using jet and flash imprint lithography

Sean Ahn; Maha Ganapathisubramanian; Mike Miller; Jack Yang; Jin Choi; Frank Xu; Douglas J. Resnick; S. V. Sreenivasan

doi:10.1117/12.918040

21 March 2012 Roll-to-roll nanopatterning using jet and flash imprint lithography

Sean Ahn, Maha Ganapathisubramanian, Mike Miller, Jack Yang, Jin Choi, Frank Xu, Douglas J. Resnick, S. V. Sreenivasan

Proceedings Volume 8323, Alternative Lithographic Technologies IV; 83231L (2012) https://doi.org/10.1117/12.918040
Event: SPIE Advanced Lithography, 2012, San Jose, California, United States

Abstract

The ability to pattern materials at the nanoscale can enable a variety of applications ranging from high density data storage, displays, photonic devices and CMOS integrated circuits to emerging applications in the biomedical and energy sectors. These applications require varying levels of pattern control, short and long range order, and have varying cost tolerances. Extremely large area R2R manufacturing on flexible substrates is ubiquitous for applications such as paper and plastic processing. It combines the benefits of high speed and inexpensive substrates to deliver a commodity product at low cost. The challenge is to extend this approach to the realm of nanopatterning and realize similar benefits. The cost of manufacturing is typically driven by speed (or throughput), tool complexity, cost of consumables (materials used, mold or master cost, etc.), substrate cost, and the downstream processing required (annealing, deposition, etching, etc.). In order to achieve low cost nanopatterning, it is imperative to move towards high speed imprinting, less complex tools, near zero waste of consumables and low cost substrates. The Jet and Flash Imprint Lithography (J-FIL^TM) process uses drop dispensing of UV curable resists to assist high resolution patterning for subsequent dry etch pattern transfer. The technology is actively being used to develop solutions for memory markets including Flash memory and patterned media for hard disk drives. In this paper we address the key challenges for roll based nanopatterning by introducing a novel concept: Ink Jet based Roll-to-Roll Nanopatterning. To address this challenge, we have introduced a J-FIL based demonstrator product, the LithoFlex 100. Topics that are discussed in the paper include tool design and process performance. In addition, we have used the LithoFlex 100 to fabricate high performance wire grid polarizers on flexible polycarbonate (PC) films. Transmission of better than 80% and extinction ratios on the order of 4500 have been achieved.

Citation Download Citation

Sean Ahn, Maha Ganapathisubramanian, Mike Miller, Jack Yang, Jin Choi, Frank Xu, Douglas J. Resnick, and S. V. Sreenivasan "Roll-to-roll nanopatterning using jet and flash imprint lithography", Proc. SPIE 8323, Alternative Lithographic Technologies IV, 83231L (21 March 2012); https://doi.org/10.1117/12.918040

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available