Paper
18 December 2012 Time-space conversion for short pulse generation with a long lifetime phosphor
Mitsunori Saito, Shingo Nakamura
Author Affiliations +
Abstract
An optical system was designed and fabricated to achieve signal wavelength conversion. Although a rare-earth doped phosphor was useful to achieve the infrared-to-visible conversion, its long-lasting phosphorescence prevented high-frequency modulation. This problem was solved by using a time-space conversion method, in which a phosphorescent disk was rotated to attain the fast-response wavelength conversion. When an infrared pulse train with 500-ns duration and 1-MHz repetition rate was focused on the rotating disk, phosphorescent dots were created along the disk periphery. By detecting the phosphorescence at a downstream position of the dot trajectory, a visible signal of 1 MHz was observed.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mitsunori Saito and Shingo Nakamura "Time-space conversion for short pulse generation with a long lifetime phosphor", Proc. SPIE 8550, Optical Systems Design 2012, 85502Y (18 December 2012); https://doi.org/10.1117/12.981657
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Luminescence

Modulation

Upconversion

Infrared radiation

Signal detection

Visible radiation

Telecommunications

Back to Top