Paper
5 December 2012 Design of 800×2 low-noise readout circuit for near-infrared InGaAs focal plane array
Zhangcheng Huang, Songlei Huang, Jiaxiong Fang
Author Affiliations +
Abstract
InGaAs near-infrared (NIR) focal plane arrays (FPA) have important applications in space remote sensing. A design of 800×2 low-noise readout integrated circuit (T800 ROIC) with a pitch of 25 μm is presented for a dual-band monolithic InGaAs FPA. Mathematical analysis and transient noise simulations have been presented for predicting and lowering the noise in T800 ROIC. Thermal noise from input-stage amplifier which plays a dominant role in ROIC is reduced by increasing load capacitor under tradeoff and a low input offset voltage in the range of ±5 mV is obtained by optimizing transistors in the input-stage amplifier. T800 ROIC has been fabricated with 0.5-μm 5V mixed signal CMOS process and interfaced with InGaAs detector arrays. Test results show that ROIC noise is around 90 μV and input offset voltage shows a good correspondence with simulation results. 800×2 InGaAs FPA has a peak detectivity (D*) of about 1.1×1012 cmHz1/2/ W, with dynamic range of above 80dB.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhangcheng Huang, Songlei Huang, and Jiaxiong Fang "Design of 800×2 low-noise readout circuit for near-infrared InGaAs focal plane array", Proc. SPIE 8562, Infrared, Millimeter-Wave, and Terahertz Technologies II, 856205 (5 December 2012); https://doi.org/10.1117/12.999646
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Readout integrated circuits

Staring arrays

Indium gallium arsenide

Amplifiers

Sensors

Capacitors

Cadmium sulfide

RELATED CONTENT


Back to Top