Optimized energy harvesting materials and generator design

Christian Graf; Julia Hitzbleck; Torsten Feller; Karin Clauberg; Joachim Wagner; Jens Krause; Jürgen Maas

doi:10.1117/12.2010011

9 April 2013 Optimized energy harvesting materials and generator design

Christian Graf, Julia Hitzbleck, Torsten Feller, Karin Clauberg, Joachim Wagner, Jens Krause, Jürgen Maas

Proceedings Volume 8687, Electroactive Polymer Actuators and Devices (EAPAD) 2013; 86870N (2013) https://doi.org/10.1117/12.2010011
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013, San Diego, California, United States

Abstract

Electroactive polymers are soft capacitors made of thin elastic and electrically insulating films coated with compliant electrodes offering a large amount of deformation. They can either be used as actuators by applying an electric charge or they can be used as energy converters based on the electrostatic principle. These unique properties enable the industrial development of highly efficient and environmentally sustainable energy converters, which opens up the possibility to further exploit large renewable and inexhaustible energy sources like wind and water that are widely unused otherwise. Compared to other electroactive polymer materials, polyurethanes, whose formulations have been systematically modified and optimized for energy harvesting applications, have certain advantages over silicones and acrylates. The inherently higher dipole content results in a significantly increased permittivity and the dielectric breakdown strength is higher, too, whereby the overall specific energy, a measure for the energy gain, is better by at least factor ten, i.e. more than ten times the energy can be gained out of the same amount of material. In order to reduce conduction losses on the electrode during charging and discharging, a highly conductive bidirectional stretchable electrode has been developed. Other important material parameters like stiffness and bulk resistivity have been optimized to fit the requirements. To realize high power energy harvesting systems, substantial amounts of electroactive polymer material are necessary as well as a smart mechanical and electrical design of the generator. In here we report on different measures to evaluate and improve electroactive polymer materials for energy harvesting by e.g. reducing the defect occurrence and improving the electrode behavior.

Citation Download Citation

Christian Graf, Julia Hitzbleck, Torsten Feller, Karin Clauberg, Joachim Wagner, Jens Krause, and Jürgen Maas "Optimized energy harvesting materials and generator design", Proc. SPIE 8687, Electroactive Polymer Actuators and Devices (EAPAD) 2013, 86870N (9 April 2013); https://doi.org/10.1117/12.2010011

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available