Paper
17 May 2013 Experimental investigation on the effect of injection conditions on spray and atomization of a centrifugal nozzle
Wei Fan, Haoyi Song, Zhencen Fan, Lin Zhao
Author Affiliations +
Proceedings Volume 8796, 2nd International Symposium on Laser Interaction with Matter (LIMIS 2012); 87961I (2013) https://doi.org/10.1117/12.2011287
Event: 2nd International Symposium on Laser Interaction with Matter (LIMIS 2012), 2012, Xi'an, Shaanxi, China
Abstract
The effects of injection parameters on atomization of aviation kerosene (RP-3) were studied using a laser diffraction particle size analyzing system. The test results indicated that Sauter mean diameter (SMD) decreased with the increase of injection temperature. There was a critical temperature for flash evaporation, at which SMD had a sharp decrease. The critical temperature fell at first and then rose with the increase of injection pressure; however, the diameter of a centrifugal nozzle had little influence on the critical temperature. Sauter mean diameter didn’t follow the conventional law after flash evaporation. A simple and empirical correlation between critical temperature for flash evaporation and injection parameters was developed from the experimental data, which can be used to evaluate critical temperature for flash evaporation.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Fan, Haoyi Song, Zhencen Fan, and Lin Zhao "Experimental investigation on the effect of injection conditions on spray and atomization of a centrifugal nozzle", Proc. SPIE 8796, 2nd International Symposium on Laser Interaction with Matter (LIMIS 2012), 87961I (17 May 2013); https://doi.org/10.1117/12.2011287
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Computing systems

Particles

Particle systems

Diffraction

Liquids

Receivers

Back to Top