Applying high frame-rate digital radiography and dual-energy distributed-sources for advanced tomosynthesis

Gil Travish; Felix J. Rangel; Mark A. Evans; Kristin Schmiedehausen

doi:10.1117/12.2026874

26 September 2013 Applying high frame-rate digital radiography and dual-energy distributed-sources for advanced tomosynthesis

Gil Travish, Felix J. Rangel, Mark A. Evans, Kristin Schmiedehausen

Author Affiliations +

Proceedings Volume 8853, Medical Applications of Radiation Detectors III; 88530H (2013) https://doi.org/10.1117/12.2026874
Event: SPIE Optical Engineering + Applications, 2013, San Diego, California, United States

Abstract

Conventional radiography uses a single point x-ray source with a fan or cone beam to visualize various areas of the human body. An imager records the transmitted photons—historically film and now increasingly digital radiography (DR) flat panel detectors—followed by optional image post-processing. Some post-processing techniques of particular interest are tomosynthesis, and dual energy subtraction. Tomosynthesis adds the ability to recreate quasi-3D images from a series of 2D projections. These exposures are typically taken along an arc or other path; and, tomosynthesis reconstruction is used to form a three-dimensional representation of the area of interest. Dual-energy radiography adds the ability to enhance or “eliminate” structures based on their different attenuation of well-separated end-point energies in two exposures. These advanced capabilities come at a high cost in terms of complexity, imaging time, capital equipment, space, and potentially reduced image quality due to motion blur if acquired sequentially. Recently, the prospect of creating x-ray sources, which are composed of arrays of micro-emitters, has been put forward. These arrays offer a flat-panel geometry and may afford advantages in fabrication methodology, size and cost. They also facilitate the use of the dual energy technology. Here we examine the possibility of using such an array of x-ray sources combined with high frame-rate (~kHz) DR detectors to produce advanced medical images without the need for moving gantries or other complex motion systems. Combining the advantages of dual energy imaging with the ability to determine the relative depth location of anatomical structures or pathological findings from imaging procedures should prove to be a powerful diagnostic tool. We also present use cases that would benefit from the capabilities of this modality.

Citation Download Citation

Gil Travish, Felix J. Rangel, Mark A. Evans, and Kristin Schmiedehausen "Applying high frame-rate digital radiography and dual-energy distributed-sources for advanced tomosynthesis", Proc. SPIE 8853, Medical Applications of Radiation Detectors III, 88530H (26 September 2013); https://doi.org/10.1117/12.2026874

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available