Fabrication of microstructured fibers from preforms with sealed top-end holes

Sergey L. Semjonov; Alexander N. Denisov; Andrei K. Senatorov

doi:10.1117/12.2037529

7 March 2014 Fabrication of microstructured fibers from preforms with sealed top-end holes

Sergey L. Semjonov, Alexander N. Denisov, Andrei K. Senatorov

Proceedings Volume 8961, Fiber Lasers XI: Technology, Systems, and Applications; 896129 (2014) https://doi.org/10.1117/12.2037529
Event: SPIE LASE, 2014, San Francisco, California, United States

Abstract

Theoretical aspects of microstructured fibers fabrication from preforms with sealed holes at the top end are discussed. Dependences of the holes blowing degree on their diameters, on a ratio of the preform top end temperature to temperature in the center of a furnace and on other parameters are estimated. Experimental results of different microstructured fibers drawing in such a regime are presented. We have drawn the simplest microstructured fiber with one hole from a tube with outside diameter 6.2 mm and inner diameter 4.4 mm (capillary drawing). Also we have drawn MSFs from preforms with 6 and 60 small holes. To check the results of the theoretical analysis we have prepared a preform with different size holes and then drew it into a fiber. In all cases experimental results are in good agreement with theoretical estimations. Thus this method of fabrication gives the possibility to manufacture long length microstructured fibers with stable internal structural parameters, high reproducibility, ease of controlling and changing the fibers parameters and opportunity to make structures with holes of different sizes. The observed changes of the holes blowing degree in our experimental samples can be easily compensated with the help of additional heating of the preform top end. Besides, such heating makes it possible to control and change the holes blowing degree, particularly during the fibers drawing process.

Citation Download Citation

Sergey L. Semjonov, Alexander N. Denisov, and Andrei K. Senatorov "Fabrication of microstructured fibers from preforms with sealed top-end holes", Proc. SPIE 8961, Fiber Lasers XI: Technology, Systems, and Applications, 896129 (7 March 2014); https://doi.org/10.1117/12.2037529

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available