The GRAVITY metrology system: modeling a metrology in optical fibers

N. Blind; Heinrich Huber; F. Eisenhauer; J. Weber; S. Gillessen; M. Lippa; L. Burtscher; O. Hans; M. Haug; F. Haussmann; S. Huber; A. Janssen; S. Kellner; Y. Kok; T. Ott; O. Pfuhl; E. Sturm; E. Wieprecht; A. Amorim; W. Brandner; G. Perrin; K. Perraut; C. Straubmeier

doi:10.1117/12.2055553

24 July 2014 The GRAVITY metrology system: modeling a metrology in optical fibers

N. Blind, Heinrich Huber, F. Eisenhauer, J. Weber, S. Gillessen, M. Lippa, L. Burtscher, O. Hans, M. Haug, F. Haussmann, S. Huber, A. Janssen, S. Kellner, Y. Kok, T. Ott, O. Pfuhl, E. Sturm, E. Wieprecht, A. Amorim, W. Brandner, G. Perrin, K. Perraut, C. Straubmeier

Author Affiliations +

Proceedings Volume 9146, Optical and Infrared Interferometry IV; 914624 (2014) https://doi.org/10.1117/12.2055553
Event: SPIE Astronomical Telescopes + Instrumentation, 2014, Montréal, Quebec, Canada

Abstract

GRAVITY is the second generation VLT Interferometer (VLTI) instrument for high-precision narrow-angle astrometry and phase-referenced interferometric imaging. The laser metrology system of GRAVITY is at the heart of its astrometric mode, which must measure the distance of 2 stars with a precision of 10 micro-arcseconds. This means the metrology has to measure the optical path difference between the two beam combiners of GRAVITY to a level of 5 nm. The metrology design presents some non-common paths that have consequently to be stable at a level of 1 nm. Otherwise they would impact the performance of GRAVITY. The various tests we made in the past on the prototype give us hints on the components responsible for this error, and on their respective contribution to the total error. It is however difficult to assess their exact origin from only OPD measurements, and therefore, to propose a solution to this problem. In this paper, we present the results of a semi-empirical modeling of the fibered metrology system, relying on theoretical basis, as well as on characterisations of key components. The modeling of the metrology system regarding various effects, e.g., temperature, waveguide heating or mechanical stress, will help us to understand how the metrology behave. The goals of this modeling are to 1) model the test set-ups and reproduce the measurements (as a validation of the modeling), 2) determine the origin of the non-common path errors, and 3) propose modifications to the current metrology design to reach the required 1nm stability.

Citation Download Citation

N. Blind, Heinrich Huber, F. Eisenhauer, J. Weber, S. Gillessen, M. Lippa, L. Burtscher, O. Hans, M. Haug, F. Haussmann, S. Huber, A. Janssen, S. Kellner, Y. Kok, T. Ott, O. Pfuhl, E. Sturm, E. Wieprecht, A. Amorim, W. Brandner, G. Perrin, K. Perraut, and C. Straubmeier "The GRAVITY metrology system: modeling a metrology in optical fibers", Proc. SPIE 9146, Optical and Infrared Interferometry IV, 914624 (24 July 2014); https://doi.org/10.1117/12.2055553

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available