Paper
23 July 2014 Electronics design for a high precision image stabilization system
A. Casas, D. Roma, M. Carmona, J. M. Gómez, J. Bosch, M. López, J. Sabater, A. Herms, T. Maue, E. Nakai, R. Volkmer, W. Schmidt
Author Affiliations +
Abstract
A very high precision Image Stabilization System has been designed for the Solar Orbiter mission. The different components that have been designed are the Correlation Tracking Camera (CTC), Tip-Tilt controller (TTC) and the system control in order to achieve the specified requirements. For the CTC, in order to achieve the required resolution of 12 bits and reduced power consumption, we used an external ADC. For the TTC, a special focus has been dedicated to a 55 V linear regulator in a QUASI-LDO configuration and a Tip-Tilt driver in a transconductance amplifier architecture. Results show that the full system reaches an attenuation of 1/10th of a pixel at 10Hz. The TTC provides a high voltage span, enough slew-rate and the needed stability levels.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Casas, D. Roma, M. Carmona, J. M. Gómez, J. Bosch, M. López, J. Sabater, A. Herms, T. Maue, E. Nakai, R. Volkmer, and W. Schmidt "Electronics design for a high precision image stabilization system", Proc. SPIE 9154, High Energy, Optical, and Infrared Detectors for Astronomy VI, 91542J (23 July 2014); https://doi.org/10.1117/12.2054885
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Transistors

Cameras

Sensors

Electronics

Field programmable gate arrays

Image processing

RELATED CONTENT

Single-chip camera modules for mosaic image sensor
Proceedings of SPIE (May 15 2001)
High-speed camera based on a CMOS active pixel sensor
Proceedings of SPIE (February 29 2000)
Column parallel vision system: CPV
Proceedings of SPIE (April 24 2002)

Back to Top