Broadband midinfrared frequency comb with tooth scanning

Kevin F. Lee; P. Masłowski; Andrew Mills; C. Mohr; Jie Jiang; Peter G. Schunemann; M. E. Fermann

doi:10.1117/12.2077789

9 March 2015 Broadband midinfrared frequency comb with tooth scanning

Kevin F. Lee, P. Masłowski, Andrew Mills, C. Mohr, Jie Jiang, Peter G. Schunemann, M. E. Fermann

Proceedings Volume 9355, Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XV; 93550K (2015) https://doi.org/10.1117/12.2077789
Event: SPIE LASE, 2015, San Francisco, California, United States

Abstract

Frequency combs are a massively parallel source of extremely accurate optical frequencies. Frequency combs generally operate at the visible or near-infrared wavelengths, but fundamental molecular vibrations occur at midinfrared wavelengths. We demonstrate an optically-referenced, broadband midinfrared frequency comb based on a doublyresonant optical parametric oscillator (OPO). By tuning the wavelength of the reference laser, the comb line frequencies are tuned as well. By scanning the reference wavelength, any frequency can be accessed, not just the frequencies of the base comb. Combined with our comb-resolving Fourier transform spectrometer, we can measure 200 wavenumber wide broadband absorption spectra with 200 kHz linewidth comb teeth.

Our OPO is pumped by an amplified Tm fiber frequency comb, with phase-locked carrier envelope offset frequency, and repetition rate fixed by phase-locking a frequency comb line to a narrow linewidth diode laser at a telecom channel. The frequency comb is referenced to GPS by long-term stabilization of the repetition rate to a selected value using the temperature of the reference laser as the control. The resulting pump comb is about 3W of 100 fs pulses at 418 MHz repetition rate at 1950 nm. Part of the comb is used for supercontinuum generation for frequency stabilization, and the rest pumps an orientation-patterned gallium arsenide (OP-GaAs) crystal in a doubly-resonant optical parametric oscillator cavity, yielding collinear signal and idler beams from about 3 to 5.5 μm.

We verify comb scanning by resolving the 200 MHz wide absorption lines of the entire fundamental CO vibrational manifold at 11 Torr pressure.

Citation Download Citation

Kevin F. Lee, P. Masłowski, Andrew Mills, C. Mohr, Jie Jiang, Peter G. Schunemann, and M. E. Fermann "Broadband midinfrared frequency comb with tooth scanning", Proc. SPIE 9355, Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XV, 93550K (9 March 2015); https://doi.org/10.1117/12.2077789

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available