Bragg grating inscription in CYTOP polymer optical fibre using a femtosecond laser

A. Lacraz; M. Polis; A. Theodosiou; C. Koutsides; K. Kalli

doi:10.1117/12.2185161

7 May 2015 Bragg grating inscription in CYTOP polymer optical fibre using a femtosecond laser

A. Lacraz, M. Polis, A. Theodosiou, C. Koutsides, K. Kalli

Proceedings Volume 9507, Micro-structured and Specialty Optical Fibres IV; 95070K (2015) https://doi.org/10.1117/12.2185161
Event: SPIE Optics + Optoelectronics, 2015, Prague, Czech Republic

Abstract

We report on the inscription of fibre Bragg gratings (FBGs) in CYTOP (cyclic transparent optical polymer) optical fibres. A femtosecond laser beam, operating in the visible wavelength range, is focussed into the core of the fibre for direct inscription of FBGs. The fibre is moved under the focussed beam by a nanometre-resolution air-bearing stage for maximal inscription precision. The grating plane dimensions (measured with bright field microscopy) are typically 30μm × 30μm × 1μm (line by line grating) or 10μm×1μm×1μm (point by point grating) and centred in the core of the fibre for optimal grating efficiency. The FBGs have a typical reflectivity of 70%, a bandwidth of 0.25nm and an index change of ~10^-4. The FBG operate in the C-band, where CYTOP offers key advantages over poly (methyl methacrylate) optical fibres, having a significantly lower optical loss in the important near infra-red (NIR) optical communications window, with a theoretical loss of ~0.3dB/km at 1550nm. Additionally, CYTOP has a far lower affinity for water absorption and a core mode refractive index that coincides with the aqueous index regime. These properties offer several unique opportunities for polymer optical fibre sensing at NIR wavelengths, such as compatibility with existing optical networks, the potential for optical fibre sensor multiplexing and suitability for bio-sensing. We have investigated the temperature response of the grating: a linear positive shift of ~ +40pm/K has been measured with little difference between the heating and cooling response. The strain response of the FBG has also been studied with a linear shift of ~ +1.3pm/μɛ measured over a few hundreds of μɛ. We also demonstrated compatibility with a commercial Bragg grating demodulator.

Citation Download Citation

A. Lacraz, M. Polis, A. Theodosiou, C. Koutsides, and K. Kalli "Bragg grating inscription in CYTOP polymer optical fibre using a femtosecond laser", Proc. SPIE 9507, Micro-structured and Specialty Optical Fibres IV, 95070K (7 May 2015); https://doi.org/10.1117/12.2185161

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available