Paper
4 May 2015 Application comparison of LIDAR single-pulse and multi-pulse mode in high elevation difference area
Pi-yuan Yi, Peng Tong, Ying-jun Zhao
Author Affiliations +
Proceedings Volume 9543, Third International Symposium on Laser Interaction with Matter; 954312 (2015) https://doi.org/10.1117/12.2070173
Event: Third International Symposium on Laser Interaction with Matter, 2014, Jiangsu, China
Abstract
Multi-pulse technology of airborne light detection and ranging (LIDAR) system is on the rise in recent years. A flight experiment in high elevation difference area was done by using LiDAR single-pulse and multi-pulse mode. The data acquisition can be completed successfully with low point density by using the single-pulse mode, while can’t be completed with multi-pulse mode for the influence of blind zone and atmospheric margin although it has a high point density. It is proved that multi-pulse mode has an advantage in point density but the influence of atmospheric margin must be avoided. Through elevation analysis and rational flight line design, a survey task in high elevation difference area was completed with good effect.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pi-yuan Yi, Peng Tong, and Ying-jun Zhao "Application comparison of LIDAR single-pulse and multi-pulse mode in high elevation difference area", Proc. SPIE 9543, Third International Symposium on Laser Interaction with Matter, 954312 (4 May 2015); https://doi.org/10.1117/12.2070173
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LIDAR

Data acquisition

Gemini Observatory

Pulsed laser operation

Associative arrays

Atmospheric laser remote sensing

Atmospheric modeling

RELATED CONTENT


Back to Top