Process improvements in the production of silicon immersion gratings

Cynthia B. Brooks; Benjamin Kidder; Michelle Grigas; Ulf Griesmann; Daniel W. Wilson; Richard E. Muller; Daniel T. Jaffe

doi:10.1117/12.2233388

22 July 2016 Process improvements in the production of silicon immersion gratings

Cynthia B. Brooks, Benjamin Kidder, Michelle Grigas, Ulf Griesmann, Daniel W. Wilson, Richard E. Muller, Daniel T. Jaffe

Author Affiliations +

Proceedings Volume 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II; 99123Z (2016) https://doi.org/10.1117/12.2233388
Event: SPIE Astronomical Telescopes + Instrumentation, 2016, Edinburgh, United Kingdom

Abstract

We have explored a number of lithographic techniques and improvements to produce the resist lines that then define the grating groove edges of silicon immersion gratings. In addition to our lithographic process using contact printing with photomasks, which is our primary technique for the production of immersion gratings, we explored two alternative fabrication methods, direct-write electron beam and photo-lithography. We have investigated the application of antireflection (AR) coatings during our contact printing lithography method to reduce the effect of Fizeau fringes produced by the contact of the photomask on the photoresist surface. This AR coating reduces the amplitude of the periodic errors by a factor of 1.5. Electron beam (e-beam) patterning allows us to manufacture gratings that can be used in first order, with groove spacing down to 0.5 micrometer or smaller (2,000 grooves/mm), but could require significant e-beam write times of up to one week to pattern a full-sized grating. The University of Texas at Austin silicon diffractive optics group is working with Jet Propulsion Laboratory to develop an alternate e-beam method that employs chromium liftoff to reduce the write time by a factor of 10. We are working with the National Institute of Standards and Technology using laser writing to explore the possibility of creating very high quality gratings without the errors introduced during the contact-printing step. Both e-beam and laser patterning bypass the contact photolithography step and directly write the lines in photoresist on our silicon substrates, but require increased cost, time, and process complexity.

Citation Download Citation

Cynthia B. Brooks, Benjamin Kidder, Michelle Grigas, Ulf Griesmann, Daniel W. Wilson, Richard E. Muller, and Daniel T. Jaffe "Process improvements in the production of silicon immersion gratings", Proc. SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 99123Z (22 July 2016); https://doi.org/10.1117/12.2233388

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available