Paper
26 April 1989 Hostile Continuous Wave And Repetitive Pulsed Laser Environment For Fiber Optics
J. R. Palmer
Author Affiliations +
Abstract
This paper is directed at the use of high power continuous wave and repetitive pulsed lasers used in conjunction with fiber optical components. Until very recently, high power lasers have not been an environment that one would have to be concerned with. Given that some investigators are presently looking at high power lasers for transmission in optical fibers, the problem of laser damage and subsequent catastrophic failure are issues that must be addressed. Equations are provided for determining the maximum threshold damage due to coating interfaces and thermal shock in optical fiber materials. Laser damage at interfaces due to thermal shock is one of the major elements to be dealt with. As it turns out, the cladding on the fiber optic becomes an important player in the maximum threshold of the fiber. The outcoupling surface is the most sensitive to laser damage because this component of damage is a manifestation of the electric field and the mechanical bonding of the coatings.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. R. Palmer "Hostile Continuous Wave And Repetitive Pulsed Laser Environment For Fiber Optics", Proc. SPIE 0992, Fiber Optics Reliability: Benign and Adverse Environments II, (26 April 1989); https://doi.org/10.1117/12.960045
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Coating

Fiber optics

Absorption

Silica

Optical fibers

Reliability

Back to Top