7 May 2012 Parameter extraction of MEMS comb-drive near-resonance equivalent circuit: physically-based technique for a unique solution
Yasser M. Sabry, Mostafa Medhat, Bassam Saadany, Diaa Khalil, Tarik Bourouina
Author Affiliations +
Abstract
A new extraction approach for MEMS comb-drive equivalent circuit parameters is presented. The proposed method eliminates the need for fitting and optimization by direct extraction from the measured data and, thus, avoids the nonuniqueness problem associated with fitting algorithms. A silicon-on-insulator-based MEMS comb-drive actuator is designed, fabricated, and measured, and its equivalent circuit is obtained by the proposed procedure. Analytical estimation for the uncertainty in the extracted values due to the discrete nature of the measurement frequency resolution is carried out. Uncertainty in the extracted values of the equivalent motional parameters is well below 0.6% when a 0.1-Hz frequency resolution is used. The method has been used to extract the resonator quality factor at both atmospheric and vacuum operations and can be extended to other types of resonators.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2012/$25.00 © 2012 SPIE
Yasser M. Sabry, Mostafa Medhat, Bassam Saadany, Diaa Khalil, and Tarik Bourouina "Parameter extraction of MEMS comb-drive near-resonance equivalent circuit: physically-based technique for a unique solution," Journal of Micro/Nanolithography, MEMS, and MOEMS 11(2), 021205 (7 May 2012). https://doi.org/10.1117/1.JMM.11.2.021205
Published: 7 May 2012
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Capacitance

Microelectromechanical systems

Actuators

Resonators

Inductance

Silicon

Aluminum

RELATED CONTENT

Simple wireless powering scheme for MEMS devices
Proceedings of SPIE (October 01 2001)
Robust design for micro electro-thermal actuators
Proceedings of SPIE (July 29 2004)
A very high Q-factor inductor using MEMS technology
Proceedings of SPIE (March 30 2010)

Back to Top