In the southern South America, various types of aerosols have been observed including biomass burning aerosols from the Amazon region, flying ashes from the volcanic eruptions coming from the Andean Volcanic Belt, mineral dust from the Patagonian Desert, and air pollution aerosols from urban areas. To monitor such aerosols continuously, we developed a lidar observation network in Argentina and Chile. Eight lidars were installed in Argentina and one in Punta Arenas, Chile. Backscattering signals are measured at three wavelengths: 355, 532, and 1064 nm. Eight of those instruments are measuring depolarization ratio at 355 and 532 nm to detect non-spherical aerosols. In addition, four lidars are equipped Ramans channels and two high-spectral-resolution channels to measure backscattering and extinction coefficients quantitatively. Lidar operation, data analysis, and products release are implemented within the South American Environmental Risk Management Network (SAVER-Net) system, which was developed by a trinational project among Japan, Argentina, and Chile. Using lidar data, hazard information on the aerosol type and extinction coefficient at low altitude is provided for public in a near real time. In addition, plume height and qualitatively concentration for volcanic ashes are estimated. The information on volcanic ashes may be effectively used for advising aircraft landing and departing when volcanic eruptions occurs.
Continuous monitoring of aerosol profiles using lidar is helpful for a quasi-real-time indication of aerosol concentration. For instance, volcanic ash concentration and its height distribution are essential information for plane flights. Depolarization ratio and multi-wavelength measurements are useful for characterizing aerosol types such as volcanic ash, smoke, dust, sea-salt, and air pollution aerosols. High spectral resolution lidar (HSRL) and Raman scattering lidar can contribute to such aerosol characterization significantly since extinction coefficients can be measured independently from backscattering coefficients. In particular, HSRL can measure aerosol extinction during daytime and nighttime with a high sensitivity. We developed an HSRL with the iodine filter method for continuous observation of aerosols at 532nm in the northern region of Argentina in the framework of the South American Environmental Atmospheric Risk Management Network (SAVER.Net)/SATREPS project. The laser wavelength of the HSRL was controlled by a feedback system to tune the laser wavelength to the center of an iodine absorption line. The stability of the laser wavelength with the system satisfied the requirement showing very small systematic errors in the retrieval of extinction and backscatter.
Atmospheric monitoring stations are being developed in Argentina. The most important targets are volcanic ashes, desert aerosols in particular Patagonian dust and biomass burning aerosols. Six stations deployed in the Patagonian Region and Buenos Aires have lidar systems, sun photometers integrated to the AERONET/NASA monitoring network, in situ optical particle analyzers, four solar radiation sensors (pyranometer, UVA, UVB and GUV), and meteorological equipment. The stations are in the main international airports of the Regions (San Carlos de Bariloche, Comodoro Rivadavia, Neuquén, Rio Gallegos) and in Buenos Aires (Aeroparque Jorge Newbery and at CEILAP/CITEDEF). CEILAP and the National Institute of Environmental Studies (NIES) at Tsukuba, Japan developed the first iodine cell-based high spectral resolution lidar (HSRL) in Argentina to add in the lidar network. We upgraded the standard CEILAP multi-wavelength Raman lidar adding the laser frequency tuning system and the 532 iodine-filtered channel at the reception to built the HSRL. HSRL will provide daytime and nighttime direct observation of the aerosol and cloud optical properties (backscatter and extinction) without the pre-assumption of the lidar ratio. This work shows the design and construction of the first Argentinean HSRL. We also show the first lidar observations done in the country with this kind of lidar.
The Latin American Lidar Network (LALINET) is the aerosol lidar network operating over South America. LALINET is now an operative network performing a schedule of routine measurements and, currently, is composed by 9 stations distributed over South America. The main objective of LALINET is to generate a consistent and statistically relevant database to enhance the understanding of the particle distribution over the continent and its direct and indirect influence on climate. The creation of an un-biased spatiotemporal database requires a throughout review of the network on two pillars: instrumentation and data processing. Because most of the LALINET systems are not series-produced instruments and, therefore, present large differences in configuration and capabilities, attempts for network harmonization and, consequently, optimization are mandatory. In this study a review of the current instrumental status of all LALINET systems is done and analyzed in detail in order to assess the potential performance of the network and to detect networking weaknesses.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.