Improved photomask metrology through exposure emulation

James E. Potzick

doi:10.1117/12.212813

3 July 1995 Improved photomask metrology through exposure emulation

James E. Potzick

Proceedings Volume 2512, Photomask and X-Ray Mask Technology II; (1995) https://doi.org/10.1117/12.212813
Event: Photomask Japan 1995, 1995, Kanagawa, Japan

Abstract

The ultimate purpose of the photomask in IC manufacture is to define the image to be printed on a silicon wafer. Of the many factors which affect this aerial image in the wafer stepper, some are properties of the stepper projection system and some are properties of the photomask. The purpose of photomask metrology is to help optimize photomask properties to produce the desired aerial image in the stepper. Those factors attributable to the photomask include chrome feature size, phase shifter accuracy (if used), chrome edge roughness and runout, defects, etc. Most of these are usually imaged differently in the exposure tool and the metrology tool because these tools' optical systems are different. Two ways to predict the stepper aerial image from photomask measurements are simulation (modeling) and emulation. In the first, the values of the relevant photomask measurements and properties (if they are known) can be inserted into the models for both tools, and then the stepper aerial image can be predicted from the photomask measurements. Or, the stepper's aerial image of the photomask can be emulated in the metrology tool and magnified for the purpose of measurement. Present mask metrology tools, when used in transmission, duplicate the optical morphology of the projection tool. The projected stepper aerial image can be emulated by adjusting the few major generic optical parameters of the metrology tool to match those of the wafer stepper to be used. Then the measured image in the metrology tool emulates the image in the stepper, and photomask properties affect both images in the same ways. Diverse measurements of photomask characteristics can be made accurately and fast by emulating photomask performance instead of measuring the chrome geometry. All of the significant optical performance parameters of the photomask can be measured with a single tool, at the small expense of shifting to a more appropriate philosophy of mask measurement.

Citation Download Citation

James E. Potzick "Improved photomask metrology through exposure emulation", Proc. SPIE 2512, Photomask and X-Ray Mask Technology II, (3 July 1995); https://doi.org/10.1117/12.212813

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available