Paper
11 December 1997 Experiments on jet array cooling modules for high heat flux removal
John H. Lienhard V, Hesham F. Younis, Rudy S. Dahbura, Chang H. Oh
Author Affiliations +
Abstract
Experimental studies of impinging liquid jet-array cooling modules are described. Heat fluxes have reached 7.2 MW/m2 over an area of 10.3 cm2. Heat loads are applied to a metallic faceplate by a plasma-sprayed resistance heater. Faceplates are a few millimeters thick and area made from either copper or molybdenum alloys. The faceplate is cooled by an array of 14 small diameter water jets operating at speeds of 46 m/s. Cooling is believed to be entirely convective, without boiling. The construction of the plasma sprayed heaters presents several challenges, including unpredictable thermal and electrical properties, high thermal resistances, and fracture at high temperatures. Thermal resistances are quantified and our experience with the heaters is described.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John H. Lienhard V, Hesham F. Younis, Rudy S. Dahbura, and Chang H. Oh "Experiments on jet array cooling modules for high heat flux removal", Proc. SPIE 3151, High Heat Flux and Synchrotron Radiation Beamlines, (11 December 1997); https://doi.org/10.1117/12.294467
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resistance

Heat flux

Ceramics

Molybdenum

Temperature metrology

Plasma

Thin films

Back to Top