Paper
22 January 2001 Dual-mask model-based proximity correction for high-performance 0.10-μm CMOS process
Author Affiliations +
Abstract
Selective strong phase shift mask techniques, whereby a phase-shift mask exposure is followed by a binary mask exposure to define a single pattern, present unique capabilities and problems. First, there is the proper exposure balance and alignment of the two masks. Second, there is the challenge of performing optical proximity correction that will account for two overlaying exposure models and masks. This is further complicated by the need to perform multiple biasing and adjustments that are often required for development processes. In this paper, we present results for applying a new OPC correction technique to a dual exposure binary and phase-shift mask that have been used for development of 100 nm CMOS processes. The correction recipe encompasses two models that were anchored to optimized processes (exposure, NA, and ?). The correction to the masks also utilized boolean techniques to perform selective biasing without destroying the original hierarchical structure. CMOS technology utilizes isolation with pitches of active device regions below 0.4 ?m. The effective gate length on silicon is in the range of 0.08 to 0.18 ?m. Patterning of trench openings and gate regions are accomplished using deep-UV lithography.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shane R. Palmer, Mark E. Mason, John N. Randall, Tom Aton, Keeho Kim, Alexander V. Tritchkov, James Burdorf, Michael L. Rieger, and John P. Stirniman "Dual-mask model-based proximity correction for high-performance 0.10-μm CMOS process", Proc. SPIE 4186, 20th Annual BACUS Symposium on Photomask Technology, (22 January 2001); https://doi.org/10.1117/12.410679
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical proximity correction

Photomasks

Binary data

Data modeling

Etching

Phase shifts

Optical lithography

Back to Top