Evaluation of a diffractive microlens-array beam shaper for use in acceleration of laser-driven flyers

Wayne M. Trott; Robert E. Setchell; Jaime N. Castaneda; Dante M. Berry

doi:10.1117/12.446748

30 October 2001 Evaluation of a diffractive microlens-array beam shaper for use in acceleration of laser-driven flyers

Wayne M. Trott, Robert E. Setchell, Jaime N. Castaneda, Dante M. Berry

Proceedings Volume 4443, Laser Beam Shaping II; (2001) https://doi.org/10.1117/12.446748
Event: International Symposium on Optical Science and Technology, 2001, San Diego, CA, United States

Abstract

A promising new tool in shock wave physics is the generation of shock waves in test materials through the impact of small, laser-accelerated discs ('flyers'). In order to achieve the necessary one-dimensional condition of uniaxial strain in the shock-loaded material, it is vital that flyers maintain a nearly planar geometry during the acceleration and impact processes. The geometry of the flyer is significantly influenced by the spatial intensity profile of the driving laser beam. With the goal of achieving a nearly uniform drive intensity for this application, we have evaluated a diffractive, microlens-array beam shaper for use with a high-energy, Nd:Glass laser driver. Based on the near-field spatial profile of this multimode laser, a 30-mm-diameter array containing multiple hexagonal diffractive lenslets was designed and fabricated. In combination with a primary integrator lens of 76.2-mm focal length, this optical element was intended to produce a uniform intensity distribution over a 2-mm-diameter spot at the focal plane of the primary lens. Beam profiling studies were performed to determine the performance of this optical assembly. At the focal plane of the primary lens, the beam shaping optics generated a reasonably uniform profile over a large portion of the focused beam area. However, a small amount of undiffracted light resulted in a high-intensity, on-axis spike. A beam profile approaching the desired 'top hat' geometry could be obtained by moving the flyer launch plane a few mm inside or outside of the focal plane. The planarity of flyers generated using this optical assembly was evaluated using a line-imaging, optically recording velocity interferometer system (ORVIS). Results of these measurements demonstrate the deleterious effect of the on-axis spike on flyer planarity. Acceptable conditions for useful flyer impact experiments can be obtained by operating at a position that provides a near-top-hat profile.

Citation Download Citation

Wayne M. Trott, Robert E. Setchell, Jaime N. Castaneda, and Dante M. Berry "Evaluation of a diffractive microlens-array beam shaper for use in acceleration of laser-driven flyers", Proc. SPIE 4443, Laser Beam Shaping II, (30 October 2001); https://doi.org/10.1117/12.446748

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available