Paper
2 April 2004 Selective wet-etching of filtered-arc-deposited TiN films on Cr sacrificial layers
Author Affiliations +
Abstract
Titanium Nitride (TiN) is a wear resistant and complementary metal oxide silicon (CMOS) compatible material that is increasingly being investigated for MEMS applications. Incorporating any new material into a MEMS device requires the development of a processing strategy. This paper discusses a wet-etching strategy for patterning and releasing TiN features on Cr sacrificial layers. Filtered arc TiN films were deposited onto Cr coated Si (100) substrate. A Cr contact mask was sputtered over the TiN and patterned using UV photolithography. Patterned TiN features were examined using scanning electron microscopy (SEM). Rutherford Backscattering Spectroscopy (RBS) was carried out to investigate the selective etching of TiN and Cr in their respective etchants, which consisted of SC-1 for etching the TiN and a commercial chromic acid solution for etching the Cr. The results showed that Cr was not etched by SC-1 and that TiN was not etched by the Cr etchant.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew John Dowling, Muralidhar K. Ghantasala, E. Derry Doyle, and Erol C. Harvey "Selective wet-etching of filtered-arc-deposited TiN films on Cr sacrificial layers", Proc. SPIE 5276, Device and Process Technologies for MEMS, Microelectronics, and Photonics III, (2 April 2004); https://doi.org/10.1117/12.524048
Lens.org Logo
CITATIONS
Cited by 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Chromium

Tin

Etching

Silicon

Scanning electron microscopy

Optical lithography

Microelectromechanical systems

RELATED CONTENT


Back to Top