Evaluation of a residual stresses measurement device combining a radial in-plane ESPI and the blind hole drilling method

Armando Albertazzi G. Jr.; Flavio Tito Peixoto Filho; Ricardo Suterio; Felipe Kleber Amaral

doi:10.1117/12.547269

10 September 2004 Evaluation of a residual stresses measurement device combining a radial in-plane ESPI and the blind hole drilling method

Armando Albertazzi G. Jr., Flavio Tito Peixoto Filho, Ricardo Suterio, Felipe Kleber Amaral

Author Affiliations +

Proceedings Volume 5457, Optical Metrology in Production Engineering; (2004) https://doi.org/10.1117/12.547269
Event: Photonics Europe, 2004, Strasbourg, France

Abstract

A new kind of electronic speckle pattern interferometer was developed by the authors' group using conical mirrors to measure the radial in-plane displacement component. True radial in-plane sensitivity is achieved by double illumination ESPI. A compact version of this interferometer was designed and built and successfully tested outside of an optical table. This paper presents a measurement evaluation of a second generation of this interferometer applied to residual stresses measurement. An ultra high-speed drilling unit was added to the device to drill a small blind hole in the region of interest. Due to the drilling process residual stresses are released in the neighborhood of the hole. The resulting radial displacement field is conveniently measured by the radial in-plane interferometer and fitted to a mathematical model. The principal residual stresses and principal stresses directions are then determined. One main difficulty dealing with evaluation of a residual stresses measurement device is to obtain a standard with a well known reference value. Two mechanical devices where built to provide a reference residual stresses value. The first one is a long specimen under a known uniform stresses field. The second one is a long pipe with known internal pressure. Both were designed, built and calibrated to provide a reference residual stresses value to calibrate the built residual stresses measurement device. Results of the evaluation of this device are also presented in detail in this paper. Both devices where used to check the measurement performance of the developed residual stresses measurement system and the results are presented and discussed in this paper.

Citation Download Citation

Armando Albertazzi G. Jr., Flavio Tito Peixoto Filho, Ricardo Suterio, and Felipe Kleber Amaral "Evaluation of a residual stresses measurement device combining a radial in-plane ESPI and the blind hole drilling method", Proc. SPIE 5457, Optical Metrology in Production Engineering, (10 September 2004); https://doi.org/10.1117/12.547269

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available