Paper
14 March 2005 Efficient optical pumping of large-area vertical-cavity surface-emitting devices
Author Affiliations +
Abstract
The availability of high power semiconductor lasers makes it possible to optically pump large area cavities with a good spatial homogeneity and with an arbitrary profile, which is otherwise difficult to obtain with electrical injection. In addition, a high pumping efficiency may be obtained with reduced heat generation thanks to the absence of Joule heating. However, in order to fully benefit from these advantages it is necessary to pay special attention to the spectral characteristics of the cavity and to design it accordingly. We present and extend a Bragg mirrors optimization technique to control both the absorption and the transmission of the cavity around the pump wavelength. The absorption coefficient reaches close to 80% over a 30nm width pumping window around 800nm while keeping the cavity transmission below 10% at the pump wavelength. Laser action is obtained at 890 nm with an almost flat pumping (and hence gain) profile over a diameter of 80μm and a laser threshold of 11.5kW/cm2. We point out that the method may be employed in the design of vertical external cavity surface emitting lasers.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sylvain Barbay, Yves Menesguen, Isabelle Sagnes, and Robert Kuszelewicz "Efficient optical pumping of large-area vertical-cavity surface-emitting devices", Proc. SPIE 5737, Vertical-Cavity Surface-Emitting Lasers IX, (14 March 2005); https://doi.org/10.1117/12.588574
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Mirrors

Optical pumping

Reflectivity

Vertical cavity surface emitting lasers

Gallium arsenide

Laser damage threshold

Back to Top