Paper
31 December 2010 Calibration and compensation of dual sensor system used in ultra precision diameter and form measuring instrument
Yong-bo Wu, Zi Xue, Wei Zhan
Author Affiliations +
Proceedings Volume 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation; 75445H (2010) https://doi.org/10.1117/12.885462
Event: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 2010, Hangzhou, China
Abstract
In order to improve the accuracy of an instrument by reducing or correcting the error of a sensor system, a calibration device which can be used to trace the laser wavelength is used to calibrate the static and dynamic characteristics of dual sensor system. Based on the accurate calibration data of the sensor, the nonlinearity error and the coherence error are corrected and compensated using least-square approximation model and interpolation method. Test results indicate that the nonlinearity of each sensor can be within 0.15% in the range of ±10μm and the incoherence is less than 0.2 % in the range of ±5μm after corrected. Meanwhile, the cause and effect of a misalignment error between dual sensors are analyzed.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yong-bo Wu, Zi Xue, and Wei Zhan "Calibration and compensation of dual sensor system used in ultra precision diameter and form measuring instrument", Proc. SPIE 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 75445H (31 December 2010); https://doi.org/10.1117/12.885462
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Calibration

Ferroelectric materials

Interferometers

Sensor calibration

Ruby

Transducers

Back to Top