1 January 2004 Simulation of the 45-nm half-pitch node with 193-nm immersion lithography-imaging interferometric lithography and dipole illumination
Abani M. Biswas, Steven Roy Julien Brueck
Author Affiliations +
Abstract
With immersion in water (n = 1.44), the highest spatial frequency available with ArF-based (193-nm) lithography tools with a numerical aperture (NA) = n×sin θ of 1.3 (1.44×0.9) corresponds to a half-pitch of 37 nm. This suggests that the 45-nm half-pitch node should be accessible. A detailed vector simulation study is reported for two approaches to printing for this node. Both imaging interferometric lithography (IIL, with a single mask and multiple exposures incorporating pupil plane filters) and dipole illumination (with two masks separating the x and y oriented small features) are shown to be capable of printing arbitrary structures under these conditions. There is a substantial loss of contrast for TM polarization at this NA that demands that different polarizations be used to capture the high spatial frequencies in the x and y directions. Both dipole and IIL schemes offer this capability; IIL provides more robust imaging results.
©(2004) Society of Photo-Optical Instrumentation Engineers (SPIE)
Abani M. Biswas and Steven Roy Julien Brueck "Simulation of the 45-nm half-pitch node with 193-nm immersion lithography-imaging interferometric lithography and dipole illumination," Journal of Micro/Nanolithography, MEMS, and MOEMS 3(1), (1 January 2004). https://doi.org/10.1117/1.1631007
Published: 1 January 2004
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Spatial frequencies

Lithographic illumination

Lithography

Photomasks

Interferometry

Image filtering

Back to Top