The plasma display panel (PDP) is popular in the large area flat panel display market due to its relatively simple cell
structure, low cost materials, and uncomplicated manufacturing process. The cell structure of PDP, which consists of
electrodes and gas mixture, could be utilized in the manufacture of radiation detectors. In this study, we developed a
plasma display panel based x-ray detector (PXD) based on Monte-Carlo simulation. This prototype detector panel has
row and column strips, and it can thus be utilized as an imaging detector. To achieve the 2D x-ray image from the
developed panel, a PXD dedicated driving and data acquisition circuit has been developed. Now we integrate the
individual modules into a system. We hope to further study signal processing to achieve the first x-ray image of PXD.
In this study 2-dimensional plasma simulation code was used to find a new approach of x-ray detection method with
PDP-like geometry and condition. A conventional PDP geometry consisted of three electrodes was selected and Ne-Xe
composition gas was filled the cell-gap. Depending on incident X-ray energy, the number of charges generated within
the cell-gap could be different. For the charge amplification and collection of charges two consecutive ac pulses were
applied to scan and address electrodes. The increased charges were collected on the positive-bias address electrode at the
rear panel. Two parameters, such as amplitude of collected current and formation delay of collected current, were
calculated and compared. The formation delay showed more accurate relationship than the collected current amplitude.
Conventional gamma cameras which uses photomultiplier tubes(PMT) is very heavy, bulky, and
expensive. In addition, its spatial resolution is low because of geometrical limitation of PMTs. This
low resolution and large size is not efficient for the small animal imaging system which is useful in
preclinical imaging application. We have developed a small size but high spatial resolution gamma
ray detector, based on charge-coupled device(CCD) which is useful to develop a prototype model of
small animal gamma camera. Recently the sensitivity of CCD was improved and the peltier cooling
system helped to minimize the dark currents of CCD significantly. The enhanced sensitivity and
high intrinsic resolution of CCD enabled researchers to develop the small size gamma camera with
low cost. In this study we used peltier cooled CCD sensor which has about 70% of quantum
efficiency at 650nm wave length. CsI(Tl) scintillator was also used to convert the gamma ray to
visible lights. These light photons from the scintillator have been collected to the CCD surface by
Nikorr macro lens to enhance the collection efficiency. The experimental results showed that the
proposed CCD-based detection system is feasible for gamma ray detection.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.