Prof. Jerzy Mizeraczyk Profile

Prof. Jerzy Mizeraczyk

at Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences

SPIE Involvement:

Author

Publications (33)

Proceedings Article | 8 December 2016 Paper

Parametric studies on the nanosecond laser micromachining of the materials

M. Tański, J. Mizeraczyk

Proceedings Volume 10159, 101590Q (2016) https://doi.org/10.1117/12.2262065

KEYWORDS: Laser cutting, Laser drilling, Pulsed laser operation, Laser ablation, Copper, Silicon, Micromachining, Aluminum, Laser energy, Liquids

Read Abstract +

Proceedings Article | 25 July 2013 Paper

A prototype femtosecond laser system for MEMS fabrication

K. Garasz, M. Kocik, M. Tański, R. Barbucha, J. Mizeraczyk, M. Nejbauer, C. Radzewicz

Proceedings Volume 8902, 89021S (2013) https://doi.org/10.1117/12.2030552

KEYWORDS: Micromachining, Femtosecond phenomena, Microelectromechanical systems, Laser ablation, Pulsed laser operation, Prototyping, Laser systems engineering, Laser applications, Femtosecond laser micromachining, Laser cutting

Read Abstract +

Proceedings Article | 22 January 2013 Paper

Investigation of the laser generated ablation plasma plume dynamics and plasma plume sound wave dynamics

Mateusz Tański, Robert Barbucha, Marek Kocik, Katarzyna Garasz, Jerzy Mizeraczyk

Proceedings Volume 8703, 87030O (2013) https://doi.org/10.1117/12.2013415

KEYWORDS: Plasma, Pulsed laser operation, Laser ablation, Plasma generation, Acoustics, Micromachining, Cameras, Laser beam diagnostics, Laser drilling, Camera shutters

Read Abstract +

Proceedings Article | 23 April 2009 Paper

Laser prototype system for creating high density patterns on PCB

R. Barbucha, M. Tanski, M. Kocik, J. Mizeraczyk, G. Koziol, J. Borecki

Proceedings Volume 7131, 71311U (2009) https://doi.org/10.1117/12.816701

KEYWORDS: Photoresist materials, Imaging systems, Ultraviolet radiation, Optical scanning, Photomasks, Manufacturing, Raster graphics, Head, Laser systems engineering, Laser applications

Read Abstract +

Proceedings Article | 22 April 2009 Paper

System for laser micromachining of thin metal foils

R. Barbucha, M. Kocik, J. Mizeraczyk

Proceedings Volume 7131, 71311V (2009) https://doi.org/10.1117/12.816703

KEYWORDS: Metals, Micromachining, Laser systems engineering, Laser cutting, Nd:YAG lasers, Manufacturing, Polishing, Laser applications, Wet etching, Chemical reactions

Read Abstract +

Proceedings Article | 18 November 2008 Paper

Laser prototype system for creating high density patterns on PCB

R. Barbucha, M. Tanski, M. Kocik, J. Mizeraczyk, G. Koziol, J. Borecki

Proceedings Volume 7138, 71380D (2008) https://doi.org/10.1117/12.817977

KEYWORDS: Photoresist materials, Imaging systems, Ultraviolet radiation, Optical scanning, Manufacturing, Photomasks, Raster graphics, Head, Laser systems engineering, Laser applications

Read Abstract +

Proceedings Article | 13 March 2007 Paper

Laser direct imaging of high density patterns on PCB covered by photoresist

R. Barbucha, M. Kocik, J. Mizeraczyk, G. Koziol, J. Borecki

Proceedings Volume 6604, 660411 (2007) https://doi.org/10.1117/12.726996

KEYWORDS: Photoresist materials, Imaging systems, Manufacturing, Computing systems, Photomasks, Ultraviolet radiation, Laser applications, Space telescopes, Telescopes, Electronic components

Read Abstract +

Proceedings Article | 5 March 2007 Paper

CuBr laser visulization of the bubbles flow in a pulsed discharge in water

Emilia Metel, Janusz Podlinski, Miroslaw Dors, Jerzy Mizeraczyk, Nikola Sabotinov

Proceedings Volume 6604, 660412 (2007) https://doi.org/10.1117/12.726999

KEYWORDS: Electrodes, Visualization, Pulsed laser operation, Telescopes, Video, Cameras, Glasses, Oxygen, Power supplies, CCD cameras

Read Abstract +

Proceedings Article | 5 March 2007 Paper

Flow patterns measurements with PIV laser method

Janusz Podlinski, Marek Kocik, Miroslaw Dors, Emilia Metel, Jerzy Mizeraczyk

Proceedings Volume 6604, 660414 (2007) https://doi.org/10.1117/12.727088

KEYWORDS: Velocity measurements, Electrodes, 3D modeling, 3D metrology, Microwave radiation, Nd:YAG lasers, Particles, CCD cameras, Cameras, Argon

Read Abstract +

Proceedings Article | 20 February 2007 Paper

PIV laser method for investigations of the dust density influence on the dust flow structure in electrostatic precipitator

Janusz Podliński, Anna Niewulis, Jerzy Mizeraczyk, Pierre Atten

Proceedings Volume 6598, 65980Y (2007) https://doi.org/10.1117/12.726589

KEYWORDS: Electrodes, Particles, Velocity measurements, Light scattering, Laser scattering, Atmospheric particles, CCD cameras, Particle image velocimetry, Cameras, Nd:YAG lasers

Read Abstract +

Proceedings Article | 23 January 2007 Paper

Flow diagnostics using particle image velocimetry method

Jerzy Mizeraczyk, Marek Kocik, Janusz Podliński

Proceedings Volume 6598, 65980W (2007) https://doi.org/10.1117/12.726587

KEYWORDS: Cameras, 3D metrology, Plasma, Velocity measurements, CCD cameras, 3D modeling, Particles, Particle image velocimetry, Electrodes, Calibration

Read Abstract +

Proceedings Article | 23 January 2007 Paper

Laser system for micromachining of the materials

R. Barbucha, M. Kocik, J. Mizeraczyk

Proceedings Volume 6598, 65980J (2007) https://doi.org/10.1117/12.726552

KEYWORDS: Micromachining, Metals, Laser systems engineering, Laser cutting, Nd:YAG lasers, Manufacturing, Laser applications, Polishing, Control systems, Wet etching

Read Abstract +

Proceedings Article | 23 January 2007 Paper

Comparison between conventional and laser method of imaging tracks on PCB

R. Barbucha, M. Kocik, J. Mizeraczyk, G. Kozioł, J. Borecki

Proceedings Volume 6598, 65980I (2007) https://doi.org/10.1117/12.726550

KEYWORDS: Photoresist materials, Imaging systems, Manufacturing, Photomasks, Ultraviolet radiation, Laser applications, Computing systems, Image resolution, Telescopes, Electronic components

Read Abstract +

Proceedings Article | 10 December 2005 Paper

Laser direct imaging of high-density interconnect patterns on PCB

R. Barbucha, M. Kocik, J. Mizeraczyk, G. Kozioł, J. Borecki

Proceedings Volume 6157, 61570L (2005) https://doi.org/10.1117/12.660921

KEYWORDS: Photoresist materials, Copper, Ultraviolet radiation, Etching, Manufacturing, Photoresist developing, Imaging systems, Head, Stars, Laser applications

Read Abstract +

Proceedings Article | 12 October 2005 Paper

Laser direct imaging of the printed electrical circuits on PCB

R. Barbucha, M. Kocik, J. Mizeraczyk, G. Kozioł, J. Borecki

Proceedings Volume 5958, 595838 (2005) https://doi.org/10.1117/12.623376

KEYWORDS: Photoresist materials, Copper, Etching, Ultraviolet radiation, Manufacturing, Photoresist developing, Imaging systems, Head, Stars, Laser applications

Read Abstract +

Proceedings Article | 22 April 2005 Paper

Comparison of laser induced streamers to regular streamers in the positive DC corona discharge

Marek Kocik, Jerzy Mizeraczyk, Toshikazu Ohkubo, Seiji Kanazawa

Proceedings Volume 5830, (2005) https://doi.org/10.1117/12.617381

KEYWORDS: Electrodes, Cameras, Pulsed laser operation, Laser beam propagation, Ultraviolet radiation, Laser applications, Laser induced fluorescence, Excimer lasers, Pollution control, Gases

Read Abstract +

Proceedings Article | 22 April 2005 Paper

Comparison of new generation lasers: MOPA-CuBr laser and Nd:YAG laser used for precision processing of the materials

Marek Kocik, Jerzy Mizeraczyk, Robert Barbucha, Robert Queitsch, Andreas Emmel, Nikola Sabotinov, Ivan Kostadinov

Proceedings Volume 5830, (2005) https://doi.org/10.1117/12.617271

KEYWORDS: Nd:YAG lasers, Laser processing, Laser drilling, Micromachining, Pulsed laser operation, Aluminum, Copper, Materials processing, Micro cutting, Metals

Read Abstract +

Proceedings Article | 6 October 2003 Paper

Application of LIF technique for the space- and time-resolved monitoring of pollutant gas decomposition in nonthermal plasma reactors

Jerzy Mizeraczyk, Toshikazu Ohkubo, Seiji Kanazawa, Marek Kocik

Proceedings Volume 5229, (2003) https://doi.org/10.1117/12.520585

KEYWORDS: Laser induced fluorescence, Molecules, Plasma, Electrodes, Excimer lasers, Diagnostics, Molecular lasers, Dye lasers, Laser crystals, Signal detection

Read Abstract +

Laser-induced fluorescence (LIF) technique aided by intensified CCD light signal detection and fast digital image processing is demonstrated to be a useful diagnostic method for in-situ observation of the discharge-induced plasma-chemistry processes responsible for NO_x(NO + NO₂) decomposition occurring in non-thermal plasma reactors. In this paper a method and results of the LIF measurement of two-dimensional distribution of the ground-state NO molecule density inside a DC positive streamer corona reactor during NO removal from a flue gas simulator [air/NO(up to 300 ppm)] are presented. Either a needle-to-plate or nozzle-to-plate electrode system, having an electrode gap of 30-50 mm was used for generating the corona discharge in the reactor. The LIF monitoring of NO molecules was carried out under the steady-state DC corona discharge condition. The laser-induced fluorescence on the transition NO X²Π(v"=0)←A²Σ⁺(v'=0) at λ=226nm was chosen for monitoring ground-state NO molecules in the reactor. This transition was induced by irradiation of the NO molecules with UV laser pulses generated by a laser system consisted of a XeF excimer laser, dye laser and BBO crystal. The laser pulses from the XeF excimer laser (Lambda Physik, Complex 150, λ=351 nm) pumped the dye laser (Lambda Physik, Scanmate) with Coumarin 47 as a dye, which generated the laser beam of a wavelength turned around λ=450 nm. Then, the tuned dye laser beam pumped the BBO crystal in which the second harmonic radiation of a wavelength correspondingly tuned around λ=226 nm was generated. The 226-nm UV laser pulses of energy of 0.8-2 mJ and duration of about 20 ns were transformed into the form of the so-called laser sheet (width of 1 mm, height of 30-50 mm) which passed between the electrodes through the operating gas. The obtained results, presented in the form of images, which illustrated the two-dimensional distributions of NO molecule concentration in the non-thermal reactor, showed that the corona discharge-induced removal of NO molecules occurred not only in the vicinity of the plasma region formed by the corona discharge-induced removal of NO molecules occurred not only in the vicinity of the plasma region formed by the corona streamers and in the downstream region of the reactor but also in the upstream region of the reactor, i.e. before the flue gas simulator has entered the plasma region. This information obtained owing to the LIF technique, is important for the understanding of the plasma-chemistry processes responsible for NO_x decomposition in non-thermal plasma reactors and for optimising their performance.

Proceedings Article | 6 October 2003 Paper

Laser measurements of flow fields in electrostatic precipitator models using PIV method

Marek Kocik, Janusz Podlinski, Jaroslaw Dekowski, Miroslaw Dors, Jerzy Mizeraczyk

Proceedings Volume 5229, (2003) https://doi.org/10.1117/12.520765

KEYWORDS: Particles, Electrodes, Motion models, Velocity measurements, CCD cameras, Velocimetry, Atmospheric particles, Imaging systems, Polishing, Laser applications

Read Abstract +

Proceedings Article | 19 March 2002 Paper

LIF diagnostics of ground-state NO density in a reactor with streamer corona plasma

Toshikazu Ohkubo, Seiji Kanazawa, Y. Shuto, Yukiharu Nomoto, J. Mizeraczyk

Proceedings Volume 4460, (2002) https://doi.org/10.1117/12.459409

Read Abstract +

Proceedings Article | 9 April 2001 Paper

CuBr laser system for precision processing of the materials

Marek Kocik, Andrzey Dabrowski, T. Kasperkowicz, Jerzy Mizeraczyk, Nikola Sabotinov, I. Kostadinov

Proceedings Volume 4397, (2001) https://doi.org/10.1117/12.425164

KEYWORDS: Resonators, Laser resonators, Laser processing, Micromachining, Laser applications, Mirrors, Laser drilling, Pulsed laser operation, Scanners, Laser systems engineering

Read Abstract +

Proceedings Article | 25 January 2001 Paper

50-W copper bromide laser

Nikola Sabotinov, Ivan Kostadinov, Hans Bergmann, Renzo Salimbeni, Jerzy Mizeraczyk

Proceedings Volume 4184, (2001) https://doi.org/10.1117/12.414049

KEYWORDS: Pulsed laser operation, Copper vapor lasers, Hydrogen, Copper, Power supplies, Laser development, Laser resonators, Laser processing, Materials processing, Metals

Read Abstract +

Proceedings Article | 25 January 2001 Paper

CuBr laser system for precision micromachining of materials

Marek Kocik, Andrzey Dabrowski, T. Kasperkowicz, Jerzy Mizeraczyk

Proceedings Volume 4184, (2001) https://doi.org/10.1117/12.414009

KEYWORDS: Mirrors, Laser resonators, Resonators, Micromachining, Laser processing, Laser cutting, Laser drilling, Laser applications, Pulsed laser operation, Scanners

Read Abstract +

Proceedings Article | 2 November 2000 Paper

Visualization of corona discharge induced by UV (248 nm) pulses of a KrF excimer laser

Jerzy Mizeraczyk, Toshikazu Ohkubo, Seiji Kanazawa, Yukiharu Nomoto, Toshiyuki Kawasaki, Marek Kocik

Proceedings Volume 4238, (2000) https://doi.org/10.1117/12.405984

KEYWORDS: Electrodes, Ultraviolet radiation, Cameras, Excimer lasers, Pulsed laser operation, Visualization, Laser energy, Reliability, Ionization, Laser applications

Read Abstract +

Proceedings Article | 2 November 2000 Paper

CuBr laser in measurements of fluid-flow fields with PIV method

Marek Kocik, Janusz Podlinski, Jaroslaw Dekowski, Jerzy Mizeraczyk

Proceedings Volume 4238, (2000) https://doi.org/10.1117/12.405985

KEYWORDS: Pulsed laser operation, Particles, Copper vapor lasers, Laser development, Laser systems engineering, Laser applications, Nd:YAG lasers, Cameras, CCD cameras, Particle image velocimetry

Read Abstract +

Proceedings Article | 7 May 1999 Paper

Setup for measuring CuBr laser beam parameters

Marek Kocik, Mostefa Mohamed-Seghir, Jerzy Mizeraczyk

Proceedings Volume 3571, (1999) https://doi.org/10.1117/12.347603

KEYWORDS: CCD cameras, Micromachining, Optical testing, Charge-coupled devices, Laser resonators, Copper vapor lasers, Pulsed laser operation, Cobalt, Camera shutters, Objectives

Read Abstract +

Proceedings Article | 14 July 1998 Paper

10 W copper bromide laser for precision materials processing

Jerzy Mizeraczyk, Mostefa Mohamed-Seghir, I. Kostadinov, Nikola Sabotinov, Ewan Livingstone, Chris Little

Proceedings Volume 3423, (1998) https://doi.org/10.1117/12.316624

KEYWORDS: Laser cutting, Copper, Information operations, Laser processing, Wet etching, Etching, Laser applications, Silicon, Scanning electron microscopy, Materials processing

Read Abstract +

Proceedings Article | 3 October 1997 Paper

CuBr laser for precision machining in electronics

Mostefa Mohamed-Seghir, Jerzy Mizeraczyk, A. Otta, J. Wasilewski, A. Jurewicz, W. Janke, Chris Little, Nikola Sabotinov, Ewan Livingstone, I. Kostadinov

Proceedings Volume 3187, (1997) https://doi.org/10.1117/12.287826

KEYWORDS: Laser cutting, Laser applications, Scanning electron microscopy, Copper vapor lasers, Copper, Etching, Wet etching, Laser processing, Electronics, Mirrors

Read Abstract +

Proceedings Article | 14 August 1997 Paper

Generation of the infrared laser oscillations in the He-Cu sputtered systems excited by RF discharge

Marek Kocik, Jerzy Mizeraczyk, Margarita Grozeva, Nikola Sabotinov, Juergen Mentel, J. Schulze, D. Teuner, Tadeusz Adamowicz

Proceedings Volume 3186, (1997) https://doi.org/10.1117/12.280497

KEYWORDS: Infrared lasers

Read Abstract +

Proceedings Article | 4 April 1997 Paper

Precision materials processing in microelectronics with a 10 W copper bromide laser

Jerzy Mizeraczyk, A. Otta, Mostefa Mohamed-Seghir, J. Wasilewski, A. Jurewicz, W. Janke, Chris Little, Nikola Sabotinov, Ewan Livingstone, I. Kostadinov

Proceedings Volume 3092, (1997) https://doi.org/10.1117/12.270237

KEYWORDS: Laser cutting, Copper, Copper vapor lasers, Laser processing, Microelectronics, Scanning electron microscopy, Laser applications, Etching, Wet etching, Materials processing

Read Abstract +