Prof. Marcelo J. Dapino Profile

Prof. Marcelo J. Dapino

Professor at Ohio State Univ

SPIE Involvement:

Conference Program Committee | Author

Publications (74)

Proceedings Article | 9 May 2024 Paper

Magnetostrictive materials for tunable fluid pumps

Mohid Khattak, Anthony Dolph, Leon Headings, Marcelo Dapino

Proceedings Volume 12947, 129470G (2024) https://doi.org/10.1117/12.3014281

KEYWORDS: Magnetism, Magnetostrictive materials, Aluminum, Piezoelectric materials, Vibration, Sensors, Actuators

Read Abstract +

Proceedings Article | 25 April 2023 Presentation + Paper

Characterization of a PVDF sensor embedded in a metal structure using ultrasonic additive manufacturing

Mohid Khattak, Leon Headings, Marcelo Dapino

Proceedings Volume 12489, 124890F (2023) https://doi.org/10.1117/12.2659270

KEYWORDS: Sensors, Ferroelectric polymers, Metals, Aluminum, Ultrasonics, Matrices, Additive manufacturing, Structural health monitoring, Manufacturing, Vibration

Read Abstract +

Proceedings Article | 18 April 2022 Presentation + Paper

Flexible piezo-capacitive pressure sensor for measurement of wind speed and direction

Arun Ramanathan, Leon Headings, Marcelo Dapino

Proceedings Volume 12046, 1204607 (2022) https://doi.org/10.1117/12.2614329

KEYWORDS: Sensors, Wind measurement, Capacitance, Electrodes, Capacitors, Ferroelectric polymers, Dielectrics, Protactinium, Temperature metrology, Magnetometers

Read Abstract +

Proceedings Article | 22 March 2021 Presentation

Metal-matrix composites embedded with piezoelectric PVDF sensors using ultrasonic additive manufacturing

Arun Kumar Ramanathan, M. Bryant Gingerich, Leon Headings, Marcelo Dapino

Proceedings Volume 11594, 115940A (2021) https://doi.org/10.1117/12.2581845

KEYWORDS: Sensors, Ferroelectric polymers, Ultrasonics, Composites, Additive manufacturing, Smart materials, Metals, Energy harvesting, Thermal sensing, Solid state electronics

Read Abstract +

Metal-matrix composites with active components have been investigated as a way to functionalize metals. As opposed to surface-mounted approaches, smart materials embedded in metals can be effectively shielded against the environment while providing in-situ sensing, health monitoring, actuation, or energy harvesting functions. Typical manufacturing approaches can be problematic, however, in that they may physically damage the smart material or degrade its electromechanical properties. For instance, non-resin-based embedment procedures such as powder metallurgy involve isostatic compression and diffusion bonding, leading to high process temperatures and breakdown of the electromechanical properties of the active component to be embedded. This paper presents the development and characterization of an aluminum-matrix composite embedded with piezoelectric polyvinylidene fluoride (PVDF) sensors using ultrasonic additive manufacturing (UAM). UAM incorporates the principles of solid-state, ultrasonic metal welding and subtractive processes to fabricate metal-matrices with seamlessly embedded smart materials and without thermal loading. As implemented in this study, the UAM process uses as-received, commercial Al 6061 tape foilstock and TE Connectivity PVDF film. In order to increase the mechanical coupling between the sensor and the metal-matrix without the aid of adhesives, the PVDF sensor is embedded with an empirically optimized pre-compression defined by the tape foils welded above the sensor. The specimen is characterized by tensile (d31 mode), bending (d31 mode), and compression tests (d33 mode) to evaluate its functional performance. Within the investigated load range, the specimen exhibits open-circuit sensitivities of 4.6 mV/N under uniaxial tension and 9.7 mV/N under compressive impulse tests with better than 95% linearity and frequency bandwidth of several kilohertz. The technology presented in this study could be applied for load and tactile sensing, impact detection and localization, thermal measurements, energy harvesting, and non-destructive testing applications.

Proceedings Article | 21 May 2020 Presentation + Paper

Preliminary investigation of self-sensing in piezoelectric bistable laminates

Arun K. Ramanathan, Venkata Siva Chillara, Marcelo Dapino

Proceedings Volume 11377, 113770S (2020) https://doi.org/10.1117/12.2558719

KEYWORDS: Ferroelectric polymers, Sensors, Composites, Amplifiers, Microsoft Foundation Class Library, Motion models, Energy harvesting, Mechanical sensors, 3D metrology, Motion measurement

Read Abstract +

Proceedings Article | 20 May 2020 Presentation + Paper

Preliminary investigation of a differential pressure sensor using flexible piezoelectrics with pyroelectric compensation

Arun K. Ramanathan, Leon Headings, Marcelo Dapino

Proceedings Volume 11382, 113820I (2020) https://doi.org/10.1117/12.2558725

KEYWORDS: Sensors, Ferroelectric polymers, Amplifiers, Temperature metrology, Wind measurement, Aerodynamics, Fused deposition modeling, Polymers, Electrodes

Read Abstract +

Proceedings Article | 29 March 2019 Presentation + Paper

Tailored bistability in mechanically pre-stressed laminated composites through planform design

Venkata Siva Chillara, Marcelo Dapino

Proceedings Volume 10968, 1096811 (2019) https://doi.org/10.1117/12.2514331

KEYWORDS: Composites, Bistability, Chromium, Actuators, Shape analysis, Solids, Aerospace engineering, Shape memory alloys, Model-based design, Transition metals

Read Abstract +

Proceedings Article | 18 March 2019 Presentation + Paper

Design optimization of flexible piezoelectric PVDF unimorphs for surface pressure transducer applications

Arun K. Ramanathan, Leon Headings, Marcelo Dapino

Proceedings Volume 10973, 1097307 (2019) https://doi.org/10.1117/12.2514371

KEYWORDS: Ferroelectric polymers, Sensors, Electrodes, Finite element methods, Transducers, Polymers

Read Abstract +

Proceedings Article | 27 March 2018 Presentation + Paper

Near DC force measurement using PVDF sensors

Arun Kumar Ramanathan, Leon Headings, Marcelo Dapino

Proceedings Volume 10602, 106020M (2018) https://doi.org/10.1117/12.2296849

KEYWORDS: Ferroelectric polymers, Sensors, Amplifiers, Capacitance, Resistance, Resonators, Capacitors

Read Abstract +

Proceedings Article | 22 March 2018 Paper

Shape memory alloy-actuated bistable composites for morphing structures

Venkata Siva Chillara, Marcelo Dapino

Proceedings Volume 10596, 1059609 (2018) https://doi.org/10.1117/12.2296713

KEYWORDS: Composites, Shape memory alloys, Actuators, Smart materials, Bistability, Fiber reinforced polymers, Cameras

Read Abstract +

Proceedings Article | 11 April 2017 Presentation + Paper

Bistable morphing composites with selectively pre-stressed laminae

Venkata Siva Chillara, Marcelo Dapino

Proceedings Volume 10165, 101650Y (2017) https://doi.org/10.1117/12.2259787

KEYWORDS: Composites, Motion measurement, Polymers, Bistability, Smart materials, Motion models, Shape memory alloys, Fiber reinforced polymers, Chromium, 3D modeling, Actuators, Mechanics, Cameras, Thermal modeling

Read Abstract +

Proceedings Article | 20 April 2016 Presentation + Paper

Characterization of embedded fiber optic strain sensors into metallic structures via ultrasonic additive manufacturing

John Schomer, Adam Hehr, Marcelo Dapino

Proceedings Volume 9803, 980320 (2016) https://doi.org/10.1117/12.2219690

KEYWORDS: Fiber Bragg gratings, Sensors, Ultrasonics, Additive manufacturing, Metals, Aluminum, Birefringence, Temperature metrology, Polarization, Composites

Read Abstract +

Proceedings Article | 16 April 2016 Presentation + Paper

Experimental comparison of piezoelectric and magnetostrictive shunt dampers

Vivake Asnani, Zhangxian Deng, Justin Scheidler, Marcelo Dapino

Proceedings Volume 9801, 98010R (2016) https://doi.org/10.1117/12.2220302

KEYWORDS: Ceramics, Smart materials, Magnetism, Ferroelectric materials, Device simulation, Signal attenuation, Metals, Resistors

Read Abstract +

Proceedings Article | 16 April 2016 Presentation + Paper

Electroacoustics modeling of piezoelectric welders for ultrasonic additive manufacturing processes

Adam Hehr, Marcelo Dapino

Proceedings Volume 9801, 98010F (2016) https://doi.org/10.1117/12.2219570

KEYWORDS: Vibrational characterization, Ultrasonics, Additive manufacturing, 3D printing, Metals, Structural dynamics, Process modeling, Transducers, Velocity measurements, Systems modeling, Motion models, Control systems

Read Abstract +

Proceedings Article | 15 April 2016 Presentation + Paper

Vibration control via stiffness switching of magnetostrictive transducers

Justin Scheidler, Vivake Asnani, Marcelo Dapino

Proceedings Volume 9799, 979909 (2016) https://doi.org/10.1117/12.2219738

KEYWORDS: Vibration control, Switching, Magnetism, Transducers, Magnetostrictive materials, Vibration simulation, Vibration isolation, Switches, Control systems, Lawrencium, Active vibration control, Complex systems

Read Abstract +

Proceedings Article | 1 April 2015 Paper

Design and testing of a dynamically tuned magnetostrictive spring with electrically controlled stiffness

Justin Scheidler, Vivake Asnani, Marcelo Dapino

Proceedings Volume 9433, 94330F (2015) https://doi.org/10.1117/12.2085574

KEYWORDS: Magnetism, Prototyping, Transducers, Magnetostrictive materials, Manufacturing, Computer aided design, Sensors, Magnetic sensors, Inductance, Calibration

Read Abstract +

Proceedings Article | 1 April 2015 Paper

Dynamic characterization of Galfenol

Justin Scheidler, Vivake Asnani, Zhangxian Deng, Marcelo Dapino

Proceedings Volume 9432, 94320J (2015) https://doi.org/10.1117/12.2085573

KEYWORDS: Magnetism, Solids, Magnetic sensors, Sensors, Calibration, Electronics, Protactinium, Electromagnetism, Tolerancing, Visualization

Read Abstract +

Proceedings Article | 1 April 2015 Paper

Mapping of power consumption and friction reduction in piezoelectrically-assisted ultrasonic lubrication

Sheng Dong, Marcelo Dapino

Proceedings Volume 9433, 943304 (2015) https://doi.org/10.1117/12.2085567

KEYWORDS: Ultrasonics, Actuators, LabVIEW, Signal generators, Data acquisition, Protactinium, Sensors, Interfaces, Semiconducting wafers, Capacitance

Read Abstract +

Proceedings Article | 1 April 2015 Paper

Magnetostrictive vibration damper and energy harvester for rotating machinery

Zhangxian Deng, Vivake Asnani, Marcelo Dapino

Proceedings Volume 9433, 94330C (2015) https://doi.org/10.1117/12.2085566

KEYWORDS: Magnetism, Magnetostrictive materials, Resistance, Inductance, Resistors, Capacitance, Signal attenuation, Copper, Roentgenium, Dysprosium

Read Abstract +

Proceedings Article | 1 April 2015 Paper

Multiphysics modeling and design of Galfenol-based unimorph harvesters

Zhangxian Deng, Marcelo Dapino

Proceedings Volume 9433, 94330B (2015) https://doi.org/10.1117/12.2085550

KEYWORDS: Energy conversion efficiency, Resistors, Finite element methods, Resistance, Magnetism, Capacitors, 3D modeling, Magnetostrictive materials, Energy harvesting, Instrument modeling

Read Abstract +

Proceedings Article | 16 April 2014 Paper

Model for friction and wear reduction through piezoelectrically assisted ultrasonic lubrication

Sheng Dong, Marcelo Dapino

Proceedings Volume 9059, 90590C (2014) https://doi.org/10.1117/12.2046295

KEYWORDS: Ultrasonics, Data modeling, Actuators, Surface finishing, Aluminum, Motion models, Abrasives, Fourier transforms, Iron, Resistance

Read Abstract +

Proceedings Article | 1 April 2014 Paper

Modeling and design of Galfenol unimorph energy harvester

Zhangxian Deng, Marcelo Dapino

Proceedings Volume 9057, 90572A (2014) https://doi.org/10.1117/12.2047113

KEYWORDS: Magnetostrictive materials, Resistance, Magnetism, 3D modeling, Finite element methods, Optical simulations, Instrument modeling, Systems modeling, Smart materials, Sensors

Read Abstract +

Proceedings Article | 10 March 2014 Paper

Stiffness tuning of FeGa structures manufactured by ultrasonic additive manufacturing

Justin Scheidler, Marcelo Dapino

Proceedings Volume 9059, 905907 (2014) https://doi.org/10.1117/12.2046247

KEYWORDS: Additive manufacturing, Composites, Ultrasonics, Magnetism, Electroluminescent displays, Solid state physics, Feedback control, Shape analysis, Beam shaping, Manufacturing

Read Abstract +

Proceedings Article | 10 March 2014 Paper

Optimal welding parameters for very high power ultrasonic additive manufacturing of smart structures with aluminum 6061 matrix

Paul Wolcott, Adam Hehr, Marcelo Dapino

Proceedings Volume 9059, 905908 (2014) https://doi.org/10.1117/12.2046291

KEYWORDS: Additive manufacturing, Ultrasonics, Aluminum, Smart structures, Metals, Solid state physics, Ferroelectric polymers, Composites, Smart materials, Statistical methods

Read Abstract +

Proceedings Article | 10 March 2014 Paper

Interfacial shear strength estimates of NiTi-Al matrix composites fabricated via ultrasonic additive manufacturing

Adam Hehr, Joshua Pritchard, Marcelo Dapino

Proceedings Volume 9059, 905906 (2014) https://doi.org/10.1117/12.2046317

KEYWORDS: Additive manufacturing, Composites, Aluminum, Ultrasonics, Interfaces, Metals, Failure analysis, Scanning electron microscopy, X-ray microscopy, X-rays

Read Abstract +

Proceedings Article | 3 April 2013 Paper

Characterization and finite element modeling of Galfenol minor flux density loops

Zhangxian Deng, Marcelo Dapino

Proceedings Volume 8689, 86890V (2013) https://doi.org/10.1117/12.2012511

KEYWORDS: 3D modeling, Finite element methods, Systems modeling, Magnetism, Sensors, Actuators, Instrument modeling, Mechanics, Diffusion tensor imaging, Magnetostrictive materials

Read Abstract +

Proceedings Article | 29 March 2013 Paper

Nonlinear dynamic modeling for smart material electro-hydraulic actuator development

John Larson, Marcelo Dapino

Proceedings Volume 8690, 86900I (2013) https://doi.org/10.1117/12.2009921

KEYWORDS: Actuators, Smart materials, Data modeling, Sensors, Velocity measurements, Nonlinear dynamics, Motion models, Electroluminescent displays, Systems modeling, Magnetism

Read Abstract +

Proceedings Article | 29 March 2013 Paper

Nonlinear dynamic model for magnetically-tunable Galfenol vibration absorbers

Justin Scheidler, Marcelo Dapino

Proceedings Volume 8690, 869002 (2013) https://doi.org/10.1117/12.2010114

KEYWORDS: Composites, Magnetism, Magnetostrictive materials, Ultrasonics, 3D modeling, Additive manufacturing, Smart materials, Aluminum, Nonlinear dynamics, Metals

Read Abstract +

Proceedings Article | 30 March 2012 Paper

Design of a smart material electro-hydraulic actuator with improved frequency bandwidth

John Larson, Marcelo Dapino

Proceedings Volume 8343, 83430K (2012) https://doi.org/10.1117/12.915447

KEYWORDS: Actuators, Smart materials, Sensors, Performance modeling, Fluid dynamics, Data modeling, Systems modeling, Motion models, Resistance, Complex systems

Read Abstract +

Proceedings Article | 30 March 2012 Paper

Piezoelectrically-induced ultrasonic lubrication by way of Poisson effect

Sheng Dong, Marcelo Dapino

Proceedings Volume 8343, 83430L (2012) https://doi.org/10.1117/12.916404

KEYWORDS: Ultrasonics, Aluminum, Motion models, Interfaces, Kinematics, Aerospace engineering, Wave propagation, Human-machine interfaces, Modulation, Autoregressive models

Read Abstract +

Proceedings Article | 28 March 2012 Paper

Stress-induced tuning of ultrasonic additive manufacturing Al-NiTi composites

Ryan Hahnlen, Marcelo Dapino

Proceedings Volume 8342, 83421J (2012) https://doi.org/10.1117/12.915582

KEYWORDS: Composites, Aluminum, Solids, Shape memory alloys, Thermal modeling, Ultrasonics, Additive manufacturing, Metals, Temperature metrology, Atrial fibrillation

Read Abstract +

Proceedings Article | 30 April 2011 Paper

Performance and modeling of active metal-matrix composites manufactured by ultrasonic additive manufacturing

Ryan Hahnlen, Marcelo Dapino

Proceedings Volume 7979, 797903 (2011) https://doi.org/10.1117/12.881152

KEYWORDS: Composites, Aluminum, Ferroelectric polymers, Additive manufacturing, Ultrasonics, Temperature metrology, Metals, Magnetism, Smart materials, Atrial fibrillation

Read Abstract +

Proceedings Article | 29 April 2011 Paper

High-frequency valve development for smart material electro-hydraulic actuators

John Larson, Marcelo Dapino

Proceedings Volume 7979, 79790E (2011) https://doi.org/10.1117/12.881958

KEYWORDS: Actuators, Smart materials, Resistance, 3D modeling, Micromachining, Chemical elements, Cadmium, Sensors, Fluid dynamics, Oxidation

Read Abstract +

Proceedings Article | 28 April 2011 Paper

3D dynamic finite element model for magnetostrictive galfenol-based devices

Suryarghya Chakrabarti, Marcelo Dapino

Proceedings Volume 7978, 79781C (2011) https://doi.org/10.1117/12.881159

KEYWORDS: 3D modeling, Magnetism, Transducers, Actuators, Systems modeling, Finite element methods, Data modeling, Chemical elements, Magnetostrictive materials, Electromagnetism

Read Abstract +

Proceedings Article | 28 April 2011 Paper

Coupled axisymmetric finite element model of a magneto-hydraulic actuator for active engine mounts

Suryarghya Chakrabarti, Marcelo Dapino

Proceedings Volume 7979, 79790C (2011) https://doi.org/10.1117/12.881158

KEYWORDS: Actuators, Magnetism, Fluid dynamics, Finite element methods, Systems modeling, Einsteinium, Transducers, Francium, 3D modeling, Anisotropy

Read Abstract +

Proceedings Article | 29 March 2010 Paper

Friction control in automotive seat belt systems by piezoelectrically generated ultrasonic vibrations

Shravan Bharadwaj, Marcelo Dapino

Proceedings Volume 7645, 76450P (2010) https://doi.org/10.1117/12.848914

KEYWORDS: Ultrasonics, Control systems, Systems modeling, Interfaces, Motion models, Actuators, Mechanics, Iron, Solid modeling, Vibration control

Read Abstract +

Proceedings Article | 29 March 2010 Paper

Design and modeling of a hydraulically amplified magnetostrictive actuator for automotive engine mounts

Suryarghya Chakrabarti, Marcelo Dapino

Proceedings Volume 7645, 76450G (2010) https://doi.org/10.1117/12.848875

KEYWORDS: Actuators, Magnetism, Magnetostrictive materials, Diffusion, Fluid dynamics, Transducers, Systems modeling, Smart materials, Performance modeling, Structural dynamics

Read Abstract +

Proceedings Article | 29 March 2010 Paper

Active metal-matrix composites with embedded smart materials by ultrasonic additive manufacturing

Ryan Hahnlen, Marcelo Dapino

Proceedings Volume 7645, 76450O (2010) https://doi.org/10.1117/12.848853

KEYWORDS: Composites, Aluminum, Ultrasonics, Dielectrics, Additive manufacturing, Sensors, Metals, Smart materials, Ferroelectric polymers, Magnetism

Read Abstract +

Proceedings Article | 1 April 2009 Paper

Effect of load on active friction control using ultrasonic vibrations

Shravan Bharadwaj, Marcelo Dapino

Proceedings Volume 7290, 72900G (2009) https://doi.org/10.1117/12.817052

KEYWORDS: Transducers, Ultrasonics, Motion models, Vibration control, Aluminum, Velocity measurements, Actuators, Ions, Data modeling, Fourier transforms

Read Abstract +

Proceedings Article | 1 April 2009 Paper

Aluminum-matrix composites with embedded Ni-Ti wires by ultrasonic consolidation

Ryan Hahnlen, Marcelo Dapino, Matt Short, Karl Graff

Proceedings Volume 7290, 729009 (2009) https://doi.org/10.1117/12.817036

KEYWORDS: Composites, Aluminum, Ultrasonics, Resistance, Metals, Temperature metrology, Additive manufacturing, Interfaces, Sensors, Optical fibers

Read Abstract +

[Smart Vehicle Workshop] This paper presents the development of active aluminum-matrix composites manufactured by Ultrasonic Additive Manufacturing (UAM), an emerging rapid prototyping process based on ultrasonic metal welding. Composites created through UAM experience process temperatures as low as 20°C, in contrast to current metal-matrix fabrication processes which require fusion of materials and hence reach temperatures of 500°C and above. UAM thus creates unprecedented opportunities to develop adaptive structures with seamlessly embedded smart materials and electronic components without degrading the properties that make embedding these materials and components attractive. This research focuses on three aspects of developing UAM Ni-Ti/Al composites which have not been accomplished before: (i) Characterization of the mechanical properties of the composite matrix; (ii) Investigation of Ni-Ti/Al composites as tunable stiffness materials and as strain sensors based on the shape memory effect; and (iii) Development of constitutive models for UAM Ni-Ti/Al composites. The mechanical characterization shows an increase in tensile strength of aluminum UAM builds over the parent material (Al 3003-H18), likely due to grain refinement caused by the UAM process. We demonstrate the ability to embed Ni-Ti wires up to 203 μm in diameter in an aluminum matrix, compared with only 100 μm in previous studies. The resulting Ni-Ti/Al UAM composites have cross sectional area ratios of up to 13.4% Ni-Ti. These composites exhibit a change in stiffness of 6% and a resistivity change of -3% when the Ni- Ti wires undergo martensite to austenite transformation. The Ni-Ti area ratios and associated strength of the shape memory effect are expected to increase as the UAM process becomes better understood and is perfected. The Brinson constitutive model for shape memory transformations is used to describe the stiffness and the strain sensing of Ni-Ti/Al composites in response to temperature changes.

Proceedings Article | 1 April 2009 Paper

Measurement and modeling of magnetomechanical coupling in magnetostrictive iron-gallium alloys

Phillip Evans, Marcelo Dapino

Proceedings Volume 7289, 72891X (2009) https://doi.org/10.1117/12.815826

KEYWORDS: Magnetism, Particles, Thermodynamics, Homogenization, Stochastic processes, Magnetostrictive materials, 3D modeling, Anisotropy, Switching, Berkelium

Read Abstract +

Proceedings Article | 1 April 2009 Paper

Design and microfabrication of a PVDF acoustic sensor

Jian Xu, Marcelo Dapino, Daniel Gallego Perez, Derek Hansford

Proceedings Volume 7290, 72900A (2009) https://doi.org/10.1117/12.817028

KEYWORDS: Ferroelectric polymers, Sensors, Electrodes, Amplifiers, Acoustics, Capacitance, Resistance, Microfabrication, Copper, Optimization (mathematics)

Read Abstract +

Proceedings Article | 1 April 2009 Paper

Design and modeling of a hydraulically amplified magnetostrictive actuator for automotive engine mounts

Suryarghya Chakrabarti, Marcelo Dapino

Proceedings Volume 7290, 72900D (2009) https://doi.org/10.1117/12.817019

KEYWORDS: Actuators, Smart materials, Fluid dynamics, Magnetism, Electromagnetism, Signal generators, Data modeling, Electrodynamics, Vibration isolation, Krypton

Read Abstract +

Proceedings Article | 2 April 2008 Paper

Fully-coupled model for the direct and inverse effects in cubic magnetostrictive materials

Phillip Evans, Marcelo Dapino

Proceedings Volume 6929, 692922 (2008) https://doi.org/10.1117/12.776558

KEYWORDS: 3D modeling, Magnetism, Magnetostrictive materials, Motion models, Anisotropy, Crystals, Data modeling, Transducers, Thermodynamics, Instrument modeling

Read Abstract +

Proceedings Article | 2 April 2008 Paper

Dynamic strain-field hysteresis model for ferromagnetic shape memory Ni-Mn-Ga

Neelesh Sarawate, Marcelo Dapino

Proceedings Volume 6929, 69291R (2008) https://doi.org/10.1117/12.776486

KEYWORDS: Magnetism, Actuators, Diffusion, Data modeling, Motion models, Structural dynamics, Thermodynamics, Statistical modeling, Crystals, Ferromagnetics

Read Abstract +

Proceedings Article | 2 April 2008 Paper

Equivalence of magnetoelastic, elastic, and mechanical work energies with stress-induced anisotropy

Chaitanya Mudivarthi, Supratik Datta, Jayasimha Atulasimha, Alison Flatau, Phillip Evans, Marcelo Dapino

Proceedings Volume 6929, 69291X (2008) https://doi.org/10.1117/12.784224

KEYWORDS: Anisotropy, Magnetostrictive materials, Magnetism, 3D modeling, Gallium, Thermodynamics, Crystals, Inspection, Superposition, Ferromagnetics

Read Abstract +

Proceedings Article | 2 April 2008 Paper

Fully-coupled magnetoelastic model for Galfenol alloys incorporating eddy current losses and thermal relaxation

Phillip Evans, Marcelo Dapino

Proceedings Volume 6929, 69291W (2008) https://doi.org/10.1117/12.776485

KEYWORDS: Magnetism, Magnetostrictive materials, 3D modeling, Transducers, Thermal modeling, Samarium, Anisotropy, Thermal effects, Thermodynamics, Magnetic sensors

Read Abstract +

Proceedings Article | 26 April 2007 Paper

Open loop nonlinear optimal tracking control of a magnetostrictive terfenol-D actuator

William Oates, Phillip Evans, Ralph Smith, Marcelo Dapino

Proceedings Volume 6526, 65262L (2007) https://doi.org/10.1117/12.716254

KEYWORDS: Nonlinear control, Actuators, Magnetism, Data modeling, Model-based design, Inductance, Nonlinear optics, Control systems, Amplifiers, Ferromagnetics

Read Abstract +

Proceedings Article | 20 April 2007 Paper

Magnetomechanical characterization and unified actuator/sensor modeling of ferromagnetic shape memory alloy Ni-Mn-Ga

Neelesh Sarawate, Marcelo Dapino

Proceedings Volume 6526, 652629 (2007) https://doi.org/10.1117/12.715924

KEYWORDS: Magnetism, Thermodynamics, Data modeling, Anisotropy, Shape memory alloys, Motion models, Affine motion model, Chromium, Crystals, Ferromagnetics

Read Abstract +

Proceedings Article | 19 April 2007 Paper

Bill Armstrong memorial symposium: free energy model for magnetization and magnetostriction in stressed Galfenol alloys

Phillip Evans, Marcelo Dapino, James Restorff

Proceedings Volume 6526, 652619 (2007) https://doi.org/10.1117/12.720872

KEYWORDS: Magnetism, Magnetostrictive materials, Data modeling, Anisotropy, Molybdenum, Iron, Thermal modeling, Coastal modeling, Gallium, Thermal effects

Read Abstract +

Proceedings Article | 18 April 2007 Paper

Electrical stiffness tuning in ferromagnetic shape memory Ni-Mn-Ga

Neelesh Sarawate, Marcelo Dapino

Proceedings Volume 6529, 652916 (2007) https://doi.org/10.1117/12.715927

KEYWORDS: Magnetism, Crystals, Aluminum, Statistical modeling, Nickel, Manganese, Gallium, Sensors, Amplifiers, Ferromagnetics

Read Abstract +

Proceedings Article | 6 April 2006 Paper

Sensing behavior of ferromagnetic shape memory Ni-Mn-Ga

Neelesh Sarawate, Marcelo Dapino

Proceedings Volume 6170, 61701B (2006) https://doi.org/10.1117/12.658013

KEYWORDS: Magnetism, Sensors, Shape memory alloys, Magnetic sensors, Crystals, Actuators, Nickel, Anisotropy, Manganese, Ferromagnetics

Read Abstract +

Proceedings Article | 6 April 2006 Paper

A homogenized strain model for Ni-Mn-Ga driven with collinear field and stress

LeAnn Faidley, Marcelo Dapino, Gregory Washington

Proceedings Volume 6170, 617019 (2006) https://doi.org/10.1117/12.658706

KEYWORDS: Magnetism, Data modeling, Crystals, Nickel, Manganese, Gallium, Optimization (mathematics), Stochastic processes, Homogenization, Transducers

Read Abstract +

Ferromagnetic Shape Memory Alloys (FSMAs) in the nickel manganese gallium system have been shown to exhibit large magnetically induced strains of up to 9.5% due to magnetically driven twin variant reorientation. In order for this strain to be reversible, however, an external restoring stress or magnetic field needs to be applied orthogonal to the field and hence the implementation of Ni-Mn-Ga in applications involves the use of electromagnets, which tend to be heavy, bulky and narrowband. In previous work at The Ohio State University a sample of Ni₅₀Mn_28.7Ga_21.3 has been shown to exhibit reversible compressive strains of -4200 microstrain along its [001] direction when a magnetic field is applied along this same direction and no externally applied restoring force is present. This reversible strain is possible because of an internal stress field associated with pinning sites induced during manufacture of the crystal. This paper analyzes the switching between two variant orientations in the presence of magnetic fields (Zeeman energy) and pinning sites (pinning energy) through the formulation of a Gibbs energy functional for the crystal lattice. Minimization of the Gibbs free energy yields a strain kernel which represents the predicted behavior of an idealized 2-dimensional homogeneous single crystal with a single twin boundary and pinning site. While adequate, the kernel has limitations because it does not account for the following: (a) Ni-Mn-Ga consists of a large number of twin variants and boundaries, (b) the strength of the pinning sites may vary, and (c) the local and applied magnetic field will differ due to neighbor-to-neighbor interactions. These limiting factors are addressed in this paper by considering stochastic homogenization. Stochastic distributions are used on the interaction field and on the pinning site strength, yielding a phenomenological model for the bulk strain behavior of Ni₅₀Mn_28.7Ga_21.3. The model quantifies both the hysteresis and saturation of the strain. Constrained optimization is used to determine the necessary parameters and an error analysis is performed to assess the accuracy of the model for various loading conditions.

Proceedings Article | 6 April 2006 Paper

Model for the magnetomechanical behavior of NiMnGa driven with collinear field and stress

Xiang Wang, Marcelo Dapino

Proceedings Volume 6170, 617016 (2006) https://doi.org/10.1117/12.658292

KEYWORDS: Magnetism, Transducers, Data modeling, Crystals, Nickel, Motion models, Manganese, Gallium, Stochastic processes, Homogenization

Read Abstract +

Proceedings Article | 27 March 2006 Paper

A reptation model for magnetic materials

Thomas Braun, Ralph Smith, Marcelo Dapino

Proceedings Volume 6166, 61660G (2006) https://doi.org/10.1117/12.658520

KEYWORDS: Data modeling, Magnetism, Model-based design, Switches, Nickel, Nano opto mechanical systems, Statistical modeling, Switching, Material characterization, Ferromagnetics

Read Abstract +

Proceedings Article | 17 May 2005 Paper

Compact actuation through magnetorheological flow control and rectification of magnetostrictive vibrations

David Nosse, Marcelo Dapino

Proceedings Volume 5764, (2005) https://doi.org/10.1117/12.605444

KEYWORDS: Actuators, Resistance, Magnetism, Systems modeling, Instrument modeling, Analytical research, Smart materials, Motion models, Data modeling, Control systems

Read Abstract +

Proceedings Article | 16 May 2005 Paper

Hybrid polymer matrix Terfenol-D composite/PMN-PT transducer in mechanical series configuration

Anthony Mortensen, Marcelo Dapino

Proceedings Volume 5761, (2005) https://doi.org/10.1117/12.600110

KEYWORDS: Transducers, Composites, Magnetism, Particles, Head, Magnetostrictive materials, Electromechanical design, Epoxies, Polymers, Smart materials

Read Abstract +

Proceedings Article | 16 May 2005 Paper

Reversible strain in Ni-Mn-Ga with collinear field and stress

LeAnn Faidley, Marcelo Dapino, Gregory Washington, Thomas Lograsso

Proceedings Volume 5761, (2005) https://doi.org/10.1117/12.600210

KEYWORDS: Magnetism, Nickel, Transducers, Manganese, Gallium, Shape memory alloys, Anisotropy, Data modeling, Motion models, Ferromagnetics

Read Abstract +

Proceedings Article | 26 July 2004 Paper

High-power density actuation through Terfenol-D resonant motion and magnetorheological flow control

Brett Burton, David Nosse, Marcelo Dapino

Proceedings Volume 5390, (2004) https://doi.org/10.1117/12.544566

KEYWORDS: Actuators, Magnetism, Transducers, Particles, Fluid dynamics, Prototyping, Control systems, Magnetostrictive materials, Amplifiers, Smart materials

Read Abstract +

Proceedings Article | 21 July 2004 Paper

Dynamic behavior and stiffness tuning in solenoid-based Ni-Mn-Ga transducers

LeAnn Faidley, Marcelo Dapino, Gregory Washington, Thomas Lograsso

Proceedings Volume 5387, (2004) https://doi.org/10.1117/12.540039

KEYWORDS: Magnetism, Transducers, Nickel, Gallium, Manganese, Actuators, Data acquisition, Crystals, Manufacturing, Ferromagnetics

Read Abstract +

Proceedings Article | 13 August 2003 Paper

Effect of composition on the magnetic and elastic properties of shape-memory Ni-Mn-Ga

Aayush Malla, Marcelo Dapino, Thomas Lograsso, Deborah Schlagel

Proceedings Volume 5053, (2003) https://doi.org/10.1117/12.484359

KEYWORDS: Magnetism, Transducers, Manganese, Nickel, Magnetostrictive materials, Gallium, Copper, Actuators, Finite element methods, Ferromagnetics

Read Abstract +

Proceedings Article | 1 August 2003 Paper

Analytical and experimental issues in Ni-Mn-Ga transducers

LeAnn Faidley, Marcelo Dapino, Gregory Washington, Thomas Lograsso, Ralph Smith

Proceedings Volume 5049, (2003) https://doi.org/10.1117/12.484011

KEYWORDS: Magnetism, Transducers, Nickel, Manganese, Gallium, Actuators, Shape memory alloys, Magnetostrictive materials, Amplifiers, Ferromagnetics

Read Abstract +

Proceedings Article | 1 August 2003 Paper

Analysis of hybrid PMN/Terfenol broadband transducers in mechanical series configuration

Patrick Downey, Marcelo Dapino, Ralph Smith

Proceedings Volume 5049, (2003) https://doi.org/10.1117/12.482832

KEYWORDS: Transducers, Magnetism, Head, Smart materials, Systems modeling, Motion models, Data modeling, Transmission electron microscopy, Model-based design, Lead

Read Abstract +

Proceedings Article | 1 August 2003 Paper

A unified model for hysteresis in ferroic materials

Ralph Smith, Stefan Seelecke, Marcelo Dapino, Zoubeida Ounaies

Proceedings Volume 5049, (2003) https://doi.org/10.1117/12.482836

KEYWORDS: Data modeling, Shape memory alloys, Model-based design, Polarization, Thin films, Crystals, Stochastic processes, Homogenization, Material characterization, Ferromagnetics

Read Abstract +

Proceedings Article | 16 August 2001 Paper

Characterization of a small Terfenol-D transducer in mechanically blocked configuration

LeAnn Faidley, Marcelo Dapino, Alison Flatau

Proceedings Volume 4327, (2001) https://doi.org/10.1117/12.436563

KEYWORDS: Magnetism, Transducers, Magnetostrictive materials, Ferroelectric materials, Smart materials, Amplifiers, Crystals, Lithium, Anisotropy, Manufacturing

Read Abstract +

Proceedings Article | 22 June 2000 Paper

Modeling of a Terfenol-D ultrasonic transducer

Julie Slaughter, Marcelo Dapino, Ralph Smith, Alison Flatau

Proceedings Volume 3985, (2000) https://doi.org/10.1117/12.388838

KEYWORDS: Transducers, Magnetism, Ultrasonics, Magnetostrictive materials, Actuators, Performance modeling, Energy coupling, Industrial chemicals, Data modeling, Amplifiers

Read Abstract +

Proceedings Article | 22 June 2000 Paper

Model for the delta-E effect in magnetostrictive transducers

Marcelo Dapino, Ralph Smith, Alison Flatau

Proceedings Volume 3985, (2000) https://doi.org/10.1117/12.388821

KEYWORDS: Magnetism, Magnetostrictive materials, Transducers, Data modeling, Systems modeling, Platinum, Nickel, Iron, Motion models, Ferromagnetics

Read Abstract +

Proceedings Article | 9 June 1999 Paper

Coupled structural-magnetic strain model for magnetostrictive transducers

Marcelo Dapino, Ralph Smith, Alison Flatau

Proceedings Volume 3668, (1999) https://doi.org/10.1117/12.350719

KEYWORDS: Magnetism, Transducers, Magnetostrictive materials, Systems modeling, Data modeling, Performance modeling, Smart structures, Superposition, Aerospace engineering, Ferromagnetics

Read Abstract +

Proceedings Article | 27 July 1998 Paper

Identification and analysis of fundamental issues in Terfenol-D transducer modeling

Marcelo Dapino, Frederick Calkins, Alison Flatau

Proceedings Volume 3329, (1998) https://doi.org/10.1117/12.316892

KEYWORDS: Transducers, Magnetism, Magnetostrictive materials, Anisotropy, Thermal effects, Performance modeling, Motion models, Mathematical modeling, Crystals, Ferromagnetics

Read Abstract +

Proceedings Article | 27 July 1998 Paper

Active and structural strain model for magnetostrictive transducers

Marcelo Dapino, Ralph Smith, Alison Flatau

Proceedings Volume 3329, (1998) https://doi.org/10.1117/12.316893

KEYWORDS: Transducers, Data modeling, Magnetism, Magnetostrictive materials, Anisotropy, Actuators, Tin, Crystals, Mathematical modeling, Ferromagnetics

Read Abstract +

Proceedings Article | 16 June 1998 Paper

High bandwidth tunability in a smart vibration absorber

Alison Flatau, Marcelo Dapino, Frederick Calkins

Proceedings Volume 3327, (1998) https://doi.org/10.1117/12.310709

KEYWORDS: Magnetism, Transducers, Magnetostrictive materials, Terbium, Iron, Erbium, Dysprosium, Crystals, Actuators, Signal attenuation

Read Abstract +

Proceedings Article | 6 June 1997 Paper

Effect of prestress on the dynamic performace of a Terfenol-D transducer

Frederick Calkins, Marcelo Dapino, Alison Flatau

Proceedings Volume 3041, (1997) https://doi.org/10.1117/12.275654

KEYWORDS: Magnetism, Transducers, Magnetostrictive materials, Holmium, Cerium, Second-harmonic generation, Chlorine, Aerospace engineering, Performance modeling, Data modeling

Read Abstract +

Proceedings Article | 6 June 1997 Paper

Statistical analysis of Terfenol-D material properties

Marcelo Dapino, Alison Flatau, Frederick Calkins

Proceedings Volume 3041, (1997) https://doi.org/10.1117/12.275651

KEYWORDS: Transducers, Magnetism, Statistical analysis, Data modeling, Solids, Magnetostrictive materials, Error analysis, Performance modeling, Statistical modeling, Iron

Read Abstract +

Proceedings Article | 1 May 1996 Paper

Measured Terfenol-D material properties under varied applied magnetic field levels

Marcelo Dapino, Frederick Calkins, Alison Flatau, David Hall

Proceedings Volume 2717, (1996) https://doi.org/10.1117/12.239072

KEYWORDS: Transducers, Magnetism, Actuators, Amplifiers, Data modeling, Data conversion, Aerospace engineering, Magnetostrictive materials, Detection theory, Calibration

Read Abstract +

Showing 5 of 74 publications

Proceedings Volume Editor (4)

SPIE Conference Volume | 2 May 2008

Behavior and Mechanics of Multifunctional and Composite Materials 2008

SPIE Conference Volume | 5 April 2007

Behavior and Mechanics of Multifunctional and Composite Materials 2007

SPIE Conference Volume | 30 March 2006

Smart Structures and Materials 2006: Active Materials: Behavior and Mechanics

SPIE Conference Volume | 16 May 2005

Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics

Conference Committee Involvement (40)

Behavior and Mechanics of Multifunctional Materials XIX

17 March 2025 | Vancouver, Canada

Behavior and Mechanics of Multifunctional Materials XVIII

27 March 2024 | Long Beach, California, United States

NDE 4.0, Predictive Maintenance, Communication, and Energy Systems: The Digital Transformation of NDE

14 March 2023 | Long Beach, California, United States

Behavior and Mechanics of Multifunctional Materials XVII

13 March 2023 | Long Beach, California, United States

NDE 4.0, Predictive Maintenance, and Communication and Energy Systems in a Globally Networked World

8 March 2022 | Long Beach, California, United States

Behavior and Mechanics of Multifunctional Materials XVI

7 March 2022 | Long Beach, California, United States

Behavior and Mechanics of Multifunctional Materials XV

22 March 2021 | Online Only, California, United States

NDE 4.0 and Smart Structures for Industry, Smart Cities, Communication, and Energy

8 March 2021 | Online Only, California, United States

Smart Structures and NDE for Industry 4.0, Smart Cities, and Energy Systems

27 April 2020 | Online Only, California, United States

Behavior and Mechanics of Multifunctional Materials XIV

27 April 2020 | Online Only, California, United States

Behavior and Mechanics of Multifunctional Materials XIII

4 March 2019 | Denver, Colorado, United States

Smart Structures and NDE for Energy Systems and Industry 4.0

4 March 2019 | Denver, Colorado, United States

Behavior and Mechanics of Multifunctional Materials and Composites XII

5 March 2018 | Denver, Colorado, United States

Smart Structures and NDE for Industry 4.0

5 March 2018 | Denver, Colorado, United States

Behavior and Mechanics of Multifunctional Materials and Composites XI

26 March 2017 | Portland, Oregon, United States

Industrial and Commercial Applications of Smart Structures Technologies XI

26 March 2017 | Portland, Oregon, United States

Behavior and Mechanics of Multifunctional Materials and Composites X

21 March 2016 | Las Vegas, Nevada, United States

Industrial and Commercial Applications of Smart Structures Technologies X

21 March 2016 | Las Vegas, Nevada, United States

Behavior and Mechanics of Multifunctional Materials and Composites IX

9 March 2015 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies IX

9 March 2015 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies VIII

11 March 2014 | San Diego, California, United States

Behavior and Mechanics of Multifunctional Materials and Composites VIII

10 March 2014 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies VII

10 March 2013 | San Diego, California, United States

Behavior and Mechanics of Multifunctional Materials and Composites VII

10 March 2013 | San Diego, California, United States

Behavior and Mechanics of Multifunctional Materials and Composites VI

12 March 2012 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies VI

12 March 2012 | San Diego, California, United States

Behavior and Mechanics of Multifunctional Materials and Composites V

7 March 2011 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies V

7 March 2011 | San Diego, California, United States

Behavior and Mechanics of Multifunctional Materials and Composites IV

8 March 2010 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies IV

8 March 2010 | San Diego, California, United States

Behavior and Mechanics of Multifunctional Materials and Composites III

9 March 2009 | San Diego, California, United States

Industrial and Commercial Applications of Smart Structures Technologies III

9 March 2009 | San Diego, California, United States

Behavior and Mechanics of Multifunctional and Composite Materials II

10 March 2008 | San Diego, California, United States

Behavior and Mechanics of Multifunctional and Composite Materials

19 March 2007 | San Diego, California, United States

Modeling, Signal Processing, and Control

27 February 2006 | San Diego, California, United States

Active Materials: Behavior and Mechanics

27 February 2006 | San Diego, California, United States

Modeling, Signal Processing, and Control

7 March 2005 | San Diego, California, United States

Active Materials: Behavior and Mechanics

7 March 2005 | San Diego, California, United States

Modeling, Signal Processing, and Control

15 March 2004 | San Diego, CA, United States

Modeling, Signal Processing, and Control

3 March 2003 | San Diego, California, United States

Showing 5 of 40 Conference Committees

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years