This will count as one of your downloads.
You will have access to both the presentation and article (if available).
MSE will reuse the same building and telescope pier as CFHT. However, it will be necessary to upgrade the support pier to accommodate a bigger telescope and replace the current dome since a wider slit opening of 12.5 meters in diameter is needed. Once the project is completed the new facility will be almost indistinguishable on the outside from the current CFHT observatory. MSE will build upon CFHT’s pioneering work in remote operations, with no staff at the observatory during the night, and use modern technologies to reduce daytime maintenance work.
This paper describes the design approach for redeveloping the CFHT facility for MSE including the infrastructure and equipment considerations required to support and facilitate nighttime observations. The building will be designed so existing equipment and infrastructure can be reused wherever possible while meeting new requirement demands. Past experience and lessons learned will be used to create a modern, optimized, and logical layout of the facility. The purpose of this paper is to provide information to readers involved in the MSE project or organizations involved with the redevelopment of an existing observatory facility for a new mission.
Thermal stability improvements to the ESPaDOnS spectrograph with the addition of a thermal enclosure
The Canada France Hawaii Telescope operates a 3.6m Optical/Infrared telescope on the summit of Mauna Kea. As an effort to improve delivered image quality in a cost-effective manner, a dome venting project was initiated to eliminate local contributions to 'seeing' that exist along the optical path and arise to a large extent due to temperature gradients throughout the dome volume.
The quality of images delivered by the telescope is adversely affected by variations in air temperature within the telescope dome. Air temperature differences are caused by the air’s contact with large structures. They are different from ambient as a result of their large thermal inertias and the consequent inability of these structures to follow rapid air temperature changes.
The dome venting project is an effort to add a series of large openings, “vents”, in the skin of the dome with the purpose of allowing free stream summit winds to flush out “stagnant air”. The term, “stagnant air”, applies to thermally mixed air from the inside of the dome environment that, for one reason or another, has been heated or cooled by surfaces in the dome environment.
The addition of vents to the CFHT dome is intended to facilitate the passive flushing of interior air by the local wind, thereby greatly reducing air temperature variations, a process that has been successfully demonstrated to improve image quality at other telescope facilities and supported by recent water tunnel tests conducted by CFHT staff.
View contact details
No SPIE Account? Create one
