The Cherenkov Telescope Array (CTA) is the major ground-based gamma-ray observatory under construction. The CTA South observatory is foreseen to consist of Large-, Medium-, and Small-sized imaging atmospheric Cherenkov telescopes (IACTs). The innovative Schwarzschild-Couder Telescope (SCT) is a candidate IACT and a proposed major U.S. contribution for the Medium-sized, 10m aperture telescopes for CTA. The SCT is designed to simultaneously achieve 8 degrees field of view and high imaging resolution with unprecedented 11,328 pixels camera by implementing novel, aplanatic, segmented dual-mirror optics and compact silicon photomultiplier detectors. This presentation will provide an overview of the SCT program in the U.S. including the construction of a full-scale prototype instrument by an international consortium of scientists with the focus on the alignment of the segmented primary and secondary mirrors and the ongoing upgrade of the camera to full scale.
The prototype Schwarzschild-Couder Telescope (pSCT) is a candidate for a medium-sized telescope in the Cherenkov Telescope Array. The pSCT is based on a dual-mirror optics design that reduces the plate scale and allows for the use of silicon photomultipliers as photodetectors. The prototype pSCT camera currently has only the central sector instrumented with 25 camera modules (1600 pixels), providing a 2.68-deg field of view (FoV). The camera electronics are based on custom TARGET (TeV array readout with GSa/s sampling and event trigger) application-specific integrated circuits. Field programmable gate arrays sample incoming signals at a gigasample per second. A single backplane provides camera-wide triggers. An upgrade of the pSCT camera that will fully populate the focal plane is in progress. This will increase the number of pixels to 11,328, the number of backplanes to 9, and the FoV to 8.04 deg. Here, we give a detailed description of the pSCT camera, including the basic concept, mechanical design, detectors, electronics, current status, and first light.
The Cherenkov Telescope Array (CTA) is the next-generation ground-based observatory for very-high-energy gamma rays. One candidate design for CTA's medium-sized telescopes consists of the Schwarzschild-Couder Telescope (SCT), featuring innovative dual-mirror optics. The SCT project has built and is currently operating a 9.7-m prototype SCT (pSCT) at the Fred Lawrence Whipple Observatory (FLWO); such optical design enables the use of a compact camera with state-of-the art silicon photomultiplier detectors. A partially-equipped camera has recently successfully detected the Crab Nebula with a statistical significance of 8.6 standard deviations. A funded upgrade of the pSCT focal plane sensors and electronics is currently ongoing, which will bring the total number of channels from 1600 to 11328 and the telescope field of view from about 2.7° to 8° . In this work, we will describe the technical and scientific performance of the pSCT.
The novel 9.7m Schwarzschild-Couder Telescope (SCT), utilizing aspheric dual-mirror optical system, has been constructed as a prototype medium size x-ray telescope for the Cherenkov Telescope Array (CTA) observatory. The prototype SCT (pSCT) is designed to achieve simultaneously the wide (≥ 8°) field of view and the superior imaging resolution (0.067 per pixel) to significantly improve scientific capabilities of the observatory in conducting the sky surveys, the follow-up observations of multi-messenger transients with poorly known initial localization and the morphology studies of x-ray sources with angular extent. In this submission, we describe the hardware and software implementations of the telescope optical system as well as the methods specifically developed to align its complex optical system, in which both primary and secondary mirrors are segmented. The pSCT has detected Crab Nebula in June 2020 during ongoing commissioning, which was delayed due to worldwide pandemic and is not yet completed. Verification of pSCT performance is continuing and further improvement of optical alignment is anticipated.
For the first time in the history of ground-based y-ray astronomy, the on-axis performance of the dual mirror, aspheric, aplanatic Schwarzschild-Couder optical system has been demonstrated in a 9:7-m aperture imaging atmospheric Cherenkov telescope. The novel design of the prototype Schwarzschild-Couder Telescope (pSCT) is motivated by the need of the next-generation Cherenkov Telescope Array (CTA) observatory to have the ability to perform wide (≥8°) field-of-view observations simultaneously with superior imaging of atmospheric cascades (resolution of 0:067 per pixel or better). The pSCT design, if implemented in the CTA installation, has the potential to improve significantly both the x-ray angular resolution and the off-axis sensitivity of the observatory, reaching nearly the theoretical limit of the technique and thereby making a major impact on the CTA observatory sky survey programs, follow-up observations of multi-messenger transients with poorly known initial localization, as well as on the spatially resolved spectroscopic studies of extended x-ray sources. This contribution reports on the initial alignment procedures and point-spread-function results for the challenging segmented aspheric primary and secondary mirrors of the pSCT.
The first prototype of the Schwarzschild Couder Medium Size Telescope (pSCT) proposed for the CTA observatory has been installed in 2018 at the Fred Lawrence Whipple Observatory. The pSCT camera is composed of 25 modules with 64 channels each, covering only a small portion of the full focal plane of the telescope. The Italian Institute of Nuclear Physics (INFN) has developed and characterized in collaboration with Fondazione Bruno Kessler (FBK) a new generation of Silicon Photomultipliers (SiPMs) sensitive to the Near Ultraviolet wavelengths, based on the High Density technology (NUV-HD devices). The latest generation of 6×6 mm2 SiPMs (called NUV-HD3) have been used to equip a subsection of 9 out of 25 modules of the pSCT camera. An upgrade of this camera is foreseen between 2019 and 2020 using the same sensors, aiming to equip the full focal plane with 177 modules, for a total of more than 11000 pixels. We will present a full characterization of the performance of these devices, highlighting why they are suitable for Cherenkov light detection. An overview on the overall behavior of the installed sensors will be also given, providing information on the uniformity of the sensors and of the performance of the camera.
The construction of a prototype Schwarzschild-Couder telescope (pSCT) started in early June 2015 at the Fred Lawrence Whipple Observatory in Southern Arizona, as a candidate medium-sized telescope for the Cherenkov Telescope Array (CTA). Compared to current Davies-Cotton telescopes, this novel instrument with an aplanatic two-mirror optical system will offer a wider field-of-view and improved angular resolution. In addition, the reduced plate scale of the camera allows the use of highly-integrated photon detectors such as silicon photo multipliers. As part of CTA, this design has the potential to greatly improve the performance of the next generation ground-based observatory for very high-energy (E>60 GeV) gamma-ray astronomy. In this contribution we present the design and performance of both optical and alignment systems of the pSCT.
The Cherenkov Telescope Array (CTA) is the next generation ground-based observatory for very high-energy (E>100 GeV) gamma-ray astronomy. It will integrate several tens of imaging atmospheric Cherenkov telescopes (IACTs) with different apertures into a single astronomical instrument. The US part of the CTA collaboration has proposed and is developing a novel IACT design with a Schwarzschild-Couder (SC) aplanatic two-mirror optical system. In comparison with the traditional single mirror Davies-Cotton IACT the SC telescope, by design, can accommodate a wider field-of-view, with significantly improved imaging resolution. In addition, the reduced plate scale of an SC telescope makes it compatible with highly integrated cameras assembled from silicon photo multipliers. In this submission we report on the status of the development of the SC optical system, which is part of the e ort to construct a full-scale prototype telescope of this type at the Fred Lawrence Whipple Observatory in southern Arizona.
G. Pareschi, T. Armstrong, H. Baba, J. Bähr, A. Bonardi, G. Bonnoli, P. Brun, R. Canestrari, P. Chadwick, M. Chikawa, P.-H. Carton, V. de Souza, J. Dipold, M. Doro, D. Durand, M. Dyrda, A. Förster, M. Garczarczyk, E. Giro, J.-F. Glicenstein, Y. Hanabata, M. Hayashida, M. Hrabovski, C. Jeanney, M. Kagaya, H. Katagiri, L. Lessio, D. Mandat, M. Mariotti, C. Medina, J. Michalowski, P. Micolon, D. Nakajima, J. Niemiec, A. Nozato, M. Palatka, M. Pech, B. Peyaud, G. Pühlhofer, M. Rataj, G. Rodeghiero, G. Rojas, J. Rousselle, R. Sakonaka, P. Schovanek, K. Seweryn, C. Schultz, S. Shu, F. Stinzing, M. Stodulski, M. Teshima, P. Travniczek, C. van Eldik, V. Vassiliev, Ł Wiśniewski, A. Wörnlein, T. Yoshida
The Cherenkov Telescope Array (CTA) is the next generation very high-energy gamma-ray observatory, with at least 10
times higher sensitivity than current instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov
Telescopes (IACTs) operated in array-mode and divided into three size classes: large, medium and small telescopes. The
total reflective surface could be up to 10,000 m2 requiring unprecedented technological efforts. The properties of the
reflector directly influence the telescope performance and thus constitute a fundamental ingredient to improve and
maintain the sensitivity. The R&D status of lightweight, reliable and cost-effective mirror facets for the CTA telescope
reflectors for the different classes of telescopes is reviewed in this paper.
The laser cutting of color metals and alloys by a thickness more than 2 mm has significant difficulties due to high reflective ability and large thermal conduction. We made it possible to raise energy efficiency and quality of laser cutting by using a laser processing system (LPS) consisting both of the YAG:Nd laser with passive Q-switching on base of LiF:F2- crystals and the CO2 laser. A distinctive feature of the LPS is that the radiation of different lasers incorporated in a coaxial beam has simultaneously high level of peak power (more than 400 kW in a TEM00 mode) and significant level of average power (up to 800 W in a TEM01 mode of the CO2 laser). The application of combined radiation for cutting of an aluminum alloy of D16 type made it possible to decrease the cutting energy threshold in 1.7 times, to increase depth of treatment from 2 up to 4 mm, and velocity from 0.015 up to 0.7 m/min, and also to eliminate application of absorptive coatings. At cutting of steels the velocity of treatment was doubled, and also an oxygen flow was eliminated from the technological process and replaced by the air. The obtained raise of energy efficiency and quality of cutting is explained by an essential size reducing of a formed penetration channel and by the shifting of a thermal cutting mode from melting to evaporation. The evaluation of interaction efficiency of a combined radiation was produced on the basis of non-stationary thermal-hydrodynamic model of a heating source moving as in the cutting direction, and also into the depth of material.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.