Dr. Won Mook Choi Profile

Dr. Won Mook Choi

at KAIST

SPIE Involvement:

Author

Publications (2)

Proceedings Article | 19 January 2006 Paper

Cell-micropatterning by micromolding in capillary technique based on UV polymerization

Min Park, Won Choi, O. Park

Proceedings Volume 6036, 60361I (2006) https://doi.org/10.1117/12.638215

KEYWORDS: Proteins, Ultraviolet radiation, Polymerization, Optical lithography, Adsorption, Capillaries, Polymers, Scanning electron microscopy, Lithography, Resistance

Read Abstract +

Although optical lithography or photolithography is one of the most well-established techniques for micro, nano-fabrication, its usage with proteins and cells is restricted by steps that must be carried out in harsh organic solvents. Here, we present simple methods for cell-micropatterning using poly(dimethylsiloxane) (PDMS) as a mold. Cell non-adhesive surface or nonfouling surface providing a physico-chemical barrier to cell attachment was introduced for biomaterial pattering, where cells fail to interact with the surface over desired periods of time determined by each application. Poly(ethylene glycol) (PEG) was selected as nonfouling material to inhibit protein adsorption from biological media. The fouling resistance of PEG polymer is often explained by a steric repulsion interaction, resulting from the compression of PEG chains as proteins approach the surface. We also chose fibronectin to direct cell attachment because it is an extracellular matrix protein that is involved in the adhesion and spreading of anchorage-dependent cells. In our experiment, we propose two methods by application of micromolding in capillary (MIMIC) method based on UV polymerization to obtain a surface of alternating PEG and fibronectin. First to fabricate PEG microstructure via MIMIC method, a pre-patterned PDMS mold is placed on a desired substrate, and then the relief structure in the mold forms a network of empty channels. A drop of ethylene glycol monomer solution containing initiator for UV polymerization is placed at the open ends of the network of channels, which is then polymerized by exposure to UV light at room temperature. Once PEG microstructure is fabricated, incubation of the patterned surface in a fibronectin-containing solution allows back-filling of only the bare regions with fibronectin via adsorption. In the alternative method, a substrate is first incubated in a fibronectin-containing solution, leading to the adsorption of fibronectin over the entire surface, and the fibronectin-adsorbed substrate is then micropatterned with the PEG by MIMIC based on UV polymerization. Both methods create reproducible alternating PEG and fibronectin patterns applicable to cell-surface interactions on the microscale.

Proceedings Article | 27 January 2005 Paper

Soft-imprint technique for 3D microstructures using poly(dimethylsiloxane) mold combined with a screen mask

Won Mook Choi, O Ok Park

Proceedings Volume 5645, (2005) https://doi.org/10.1117/12.576742

KEYWORDS: Transmission electron microscopy, 3D microstructuring, Ultraviolet radiation, Polymers, Photomasks, Microfabrication, Lithography, Scanning electron microscopy, Fabrication, Nanolithography

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years