The importance of less damaged and surface sensitive metrology to identify true EUV process monitoring

GwangSeob Lim; EunKyeong Jang; BoGyeong Choi; Jihyun An; MinWoo Kang; Sunghun Lim; Jong-Hoi Cho; Daiyoung Mun; Ran Alkoken; Tal Vol; Yana Branzburg; You Jin Kim; Jeong Ho Yeo; KyungJae Choi; Kyeongju Han; Sujin Lim; Jaemin Cho; JaeEun Lim; WooSung Jung; Chanhee Kwak; Hyeon Sang Shin

doi:10.1117/12.3012913

9 April 2024 The importance of less damaged and surface sensitive metrology to identify true EUV process monitoring

GwangSeob Lim, EunKyeong Jang, BoGyeong Choi, Jihyun An, MinWoo Kang, Sunghun Lim, Jong-Hoi Cho, Daiyoung Mun, Ran Alkoken, Tal Vol, Yana Branzburg, You Jin Kim, Jeong Ho Yeo, KyungJae Choi, Kyeongju Han, Sujin Lim, Jaemin Cho, JaeEun Lim, WooSung Jung, Chanhee Kwak, Hyeon Sang Shin

Author Affiliations +

Proceedings Volume 12955, Metrology, Inspection, and Process Control XXXVIII; 1295517 (2024) https://doi.org/10.1117/12.3012913
Event: SPIE Advanced Lithography + Patterning, 2024, San Jose, California, United States

Abstract

The adoption of EUV technology in DRAM fabrication is primarily driven by the pursuit of higher device densities, improved performance, and increased energy efficiency. EUV's shorter wavelength (13.5 nm) enables enhanced resolution and finer patterning, enabling the production of smaller memory cells with reduced feature sizes. As the target patterning size is becoming sub-10nm, line edge/width roughness (LER/LWR) is the centerpiece in controlling uniformity of pattern going through the lithography process. Accordingly, it is essential to figure out the dedicated CDSEM metrology method for EUV step without any image quality degradation, charging issue, and e-beam damage that can hinder accurate diagnosis of the real process status. Empirically, it is highly difficult to predict the best metrology condition that fits to the specific resist material, dimension, and geometry due to complex stochastic effect caused by secondary electron inside photoresist (PR) material. Here we represent experimental results of PR damage caused by electron beam irradiation with different landing energy for both line and space (LS) pattern and contact hole (CH) pattern. The results enabled us to define the effect of the landing energy and geometry of pattern on the critical dimension (CD) and roughness. We examined electron irradiation induced damage by comparing etch bias of fresh location and e-beam exposed location on etch process step to fully understand shrinkage and deformation behavior. For the roughness measurement of CH pattern, we adopted new metric which enables us to quantify contact edge roughness and shape of contact. Utilizing various metrics, it was possible to observe damage on the process, which was not observed only by CD changes, and it was confirmed that the primary beam with low landing energy could be used to not only reduce damage but also enhance surface sensitivity of metrology without bias which is crucial for stochastic effect monitoring on the EUV process.

Conference Presentation

Citation Download Citation

GwangSeob Lim, EunKyeong Jang, BoGyeong Choi, Jihyun An, MinWoo Kang, Sunghun Lim, Jong-Hoi Cho, Daiyoung Mun, Ran Alkoken, Tal Vol, Yana Branzburg, You Jin Kim, Jeong Ho Yeo, KyungJae Choi, Kyeongju Han, Sujin Lim, Jaemin Cho, JaeEun Lim, WooSung Jung, Chanhee Kwak, and Hyeon Sang Shin "The importance of less damaged and surface sensitive metrology to identify true EUV process monitoring", Proc. SPIE 12955, Metrology, Inspection, and Process Control XXXVIII, 1295517 (9 April 2024); https://doi.org/10.1117/12.3012913

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available