Paper
28 August 2003 Extension of Cr-less PSM to sub 90-nm-node DRAM and logic device
Author Affiliations +
Abstract
Process windows, MEEF (Mask Error Enhancement Factor), flare, aberration effect of the CLM (Cr-less PSM) were measured by the simulations and experiments for the various DRAM cell and logic patterns compared with 6% transmittance HTPSM in the ArF lithography. We designed CLM layouts of sub 90 nm node DRAM and logic layers concerning the mask manufacturability, maximizing the NILS (Normalized Image Log Slope) and minimizing the MEEF with a semi-automatic OPC tool. Isolation, line and space and various contact patterns showed increasing process windows compared with HTPSM and this strongly depended on the layout design. We also introduced concept of checkerboard CLM to apply zigzag L/S and semi dense contact in the logic layer. Using 0.75 NA ArF Scanner, CLM showed NILS reduction by 10~15% in the presence of lens aberration and flare, which reduced DoF margin by about 0.1~0.2 μm depending on the layer. So the critical layers in sub 90 nm node DRAM satisfied 8% of EL (Exposure Latitude) and 0.3 μm of DoF (Depth of Focus) margin. Also 3D mask topographic effect of CLM in the specific contact layer was discussed.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ju-Hyung Lee, Hyung-Do Kim, Dong-Hoon Chung, Sang-Gyun Woo, Han-Ku Cho, and Woo-Sung Han "Extension of Cr-less PSM to sub 90-nm-node DRAM and logic device", Proc. SPIE 5130, Photomask and Next-Generation Lithography Mask Technology X, (28 August 2003); https://doi.org/10.1117/12.504280
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Nanoimprint lithography

Logic

Phase shifts

Lithography

Manufacturing

Scanners

RELATED CONTENT

Validation of ArF chromeless PSM in the sub 100 nm...
Proceedings of SPIE (December 27 2002)
Characterization of linewidth variation on 248 and 193 nm...
Proceedings of SPIE (September 14 2001)
Reticle inspection-based critical dimension uniformity
Proceedings of SPIE (May 11 2009)
Evaluation of ArF CLM in the sub 100 nm DRAM...
Proceedings of SPIE (June 26 2003)
Full field imaging with a 157-nm scanner
Proceedings of SPIE (May 28 2004)
Defect printability in CPL mask technology
Proceedings of SPIE (May 28 2004)

Back to Top