Paper
18 March 2016 EUV and optical lithographic pattern shift at the 5nm node
Author Affiliations +
Abstract
At the 5 nm technology node there are competing strategies for patterning: high-NA EUV, double patterning 0.33 NA EUV and a combination of optical self-aligned solutions with EUV. This paper investigates the impact of pattern shift based on the selected patterning strategy. A logic standard cell connection between TS and M0 is simulated to determine the impact of lithographic pattern shift on the overlay budget. At 5 nm node dimensions, high-NA EUV is necessary to expose the most critical layers with a single lithography exposure. The impact of high-NA EUV lithography is illustrated by comparing the pattern shift resulting from 0.33 NA vs. 0.5x NA. For the example 5 nm transistor, cost-beneficial lithography layers are patterned with EUV and the other layers are patterned optically. Both EUV and optical lithography simulations are performed to determine the maximum net pattern shift. Here, lithographic pattern shift is quantified in terms of through-focus error as well as pattern-placement error. The overlay error associated with a hybrid optical/self-aligned and EUV cut patterning scheme is compared with the results of an all EUV solution, providing an assessment of two potential patterning solutions and their impact the overall overlay budget.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Erik R. Hosler, Sathish Thiruvengadam, Jason R. Cantone, Deniz E. Civay, and Uwe Paul Schroeder "EUV and optical lithographic pattern shift at the 5nm node", Proc. SPIE 9776, Extreme Ultraviolet (EUV) Lithography VII, 977616 (18 March 2016); https://doi.org/10.1117/12.2217532
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Optical lithography

Photomasks

Monte Carlo methods

Extreme ultraviolet lithography

Lithography

Personal protective equipment

RELATED CONTENT

Writing time estimation of EB mask writer EBM 9000 for...
Proceedings of SPIE (October 17 2014)
SAQP and EUV block patterning of BEOL metal layers on...
Proceedings of SPIE (March 24 2017)
Pattern degradation with larger particles on EUV pellicle
Proceedings of SPIE (October 09 2018)
Marching to the beat of Moore's Law
Proceedings of SPIE (March 24 2006)

Back to Top