CD-SEM tool stability and tool-to-tool matching management using image sharpness monitor

Hideaki Abe; Yasuhiko Ishibashi; Yuichiro Yamazaki; Akemi Kono; Tatsuya Maeda; Akihiro Miura; Shunsuke Koshihara; Daisuke Hibino

doi:10.1117/12.813993

23 March 2009 CD-SEM tool stability and tool-to-tool matching management using image sharpness monitor

Hideaki Abe, Yasuhiko Ishibashi, Yuichiro Yamazaki, Akemi Kono, Tatsuya Maeda, Akihiro Miura, Shunsuke Koshihara, Daisuke Hibino

Author Affiliations +

Proceedings Volume 7272, Metrology, Inspection, and Process Control for Microlithography XXIII; 727210 (2009) https://doi.org/10.1117/12.813993
Event: SPIE Advanced Lithography, 2009, San Jose, California, United States

Abstract

As device feature size reduction continues, requirements for Critical Dimension (CD) metrology tools are becoming stricter. For sub-32 nm node, it is important to establish a CD-SEM tool management system with higher sensitivity for tool fluctuation and short Turn around Time (TAT). We have developed a new image sharpness monitoring method, PG monitor. The key feature of this monitoring method is the quantification of tool-induced image sharpness deterioration. The image sharpness index is calculated by a convolution method of image sharpness deterioration function caused by SEM optics feature. The sensitivity of this methodology was tested by the alteration of the beam diameter using astigmatism. PG monitor result can be related to the beam diameter variation that causes CD variation through image sharpness. PG monitor can detect the slight image sharpness change that cannot be noticed by engineer's visual check. Furthermore, PG monitor was applied to tool matching and long-term stability monitoring for multiple tools. As a result, PG monitor was found to have sufficient sensitivity to CD variation in tool matching and long-term stability assessment. The investigation showed that PG monitor can detect CD variation equivalent to ~ 0.1 nm. The CD-SEM tool management system using PG monitor is effective for CD metrology in production.

Citation Download Citation

Hideaki Abe, Yasuhiko Ishibashi, Yuichiro Yamazaki, Akemi Kono, Tatsuya Maeda, Akihiro Miura, Shunsuke Koshihara, and Daisuke Hibino "CD-SEM tool stability and tool-to-tool matching management using image sharpness monitor", Proc. SPIE 7272, Metrology, Inspection, and Process Control for Microlithography XXIII, 727210 (23 March 2009); https://doi.org/10.1117/12.813993

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available